 
Get underneath your low profile car in seconds with Roll-Ups. These auto service ramps get your vehicle up in the air so you can maintain your machine easily and without hassle. The Roll Ups, made by Race Ramps, are made of polystyrene material that is lightweight and durable. The no-skid Roll Ups can be used in conjunction with our 56" or 67" Race Ramps to further bring your car up to a level where you cam get to almost anything needed under your vehicle. The Roll-Ups may also be used as jack assist ramps when your car is too low to maneuver your jack underneath. The dimensions of these oil change ramps are 32.75" long x 14" wide x 4" tall with a 8" by 14" top platform for your wide tires. Don't get someone else to service your car, do it yourself with these auto service ramps. If this is not the car ramp you are looking for, then check out our complete line of car ramps
Roll Ups Image Gallery

- Get extra clearance when working with your performance vehicle
- Built with a solid core, these ramps durable and sturdy
- Dimensions are 32.75" long x 14" wide x 4" tall & accommodates cars with wide tires
- Lightweight polystyrene material weigh only 5 lbs each
- Works best when used conjunction with 56" Race Ramps
- 1 year manufacturer's warranty against defective materials
- Made in USA

|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
Roll-Ups Product Specifications & Price
| Item # |
Manufacturer |
Description |
Dimensions |
Ramp Loading Angle |
Weight Capacity |
Price |
| RR-RU |
Brute Industries |
Race Ramps - Roll-Ups for Servicing Low Profile Vehicles |
32.75" long x 14" wide x 4" tall - 10 lbs combined |
10.79 degrees |
3,000 lbs per pair |
+ FREE Shipping!
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| RR-WC |
(4) Race Ramps Rubber Wheel Chocks Prevents vehicle from moving while stationary to avoid injury and property damage Rubber Wheels Chocks Product Details |
 Enlarge Image |
+ FREE Shipping!
|
| RR-RMAT-6 |
Racer Mat - Padded shop mat to lie or kneel on while working on vehicles. Dimensions: 64" L x 24" W x 2" H Garage Floor Mat Product Details |
 Enlarge Image |
+ Free Shipping!
|
| 4in-Rat-Flat-Hook-special |
4" Flat Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 14 lbs 4" Flat Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook-special |
4" J-Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs 4" J-Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Truck-Winch-Chain |
4" Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Winch Strap with Chain Anchor Product Details |
 Enlarge Image |
+ 5 s&h
|
| 4in-Truck-Winch-Flat |
4" Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Flat Hook Tie-Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Chain |
3" Trailer Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 3" Trailer Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Flat |
3" Trailer Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 5lbs 3" Flat Hook Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Rat-Chain |
3" Ratcheting Tie-Down Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 18lbs 3" Ratcheting Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 18RAT-J-2 |
Ratchet Straps w/ J-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with J-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 18RAT-S-2 |
Ratchet Straps w/ S-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with S-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 2-soft-loop-2 |
(2) Soft Loop Straps Protect equipment when using hook end tie-downs - 2" wide x 20" long - 4500 lb break strength (1500 lb working load) 20" Long Soft Loop Product Details |
 Enlarge Image |
+ 5 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder 9200 lb Capacity / 33,000 lb Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2" Heavy Duty Load Binder Product Details |
 Enlarge Image |
+ 12 s&h
|
| Strap - 2" Axle |
Ratchet Combination Tie Down with Built in Axle Strap 2" wide x 8' long - 11,000lb Break Strength - 4000lb Working Load Axle Tie Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| AUTO-2-STJ |
2" Combo Auto Tie Down Hook 2" Swivel Combination T-J Hook - 11,700 lb Rating Auto Combo Hook Product Details |
 Enlarge Image |
+ 5 s&h
|

|
|