Heavy Duty Aluminum Low Profile Semi-Truck Service Ramps - 15,000 lb. Per Axle Capacity

Access the underside of your tractor-trailer to perform routine maintenance, service, and repairs with these low profile semi-truck service ramps. Specially designed to accommodate semi-trucks with low clearances or front spoilers, including the Freightliner Cascadia series, these ramps can accommodate any Class A commercial vehicle, RV, or school bus weighing up to 15,000 lbs. per axle.

The ramps' extra-long design spans 11.5' with a 4.4 deg. incline and a knife-end foot for a smooth transition and slope. Each ramp weighs just 106 lbs. for hassle-free transportation and placement. Extra-wide, serrated rungs provide superior traction for any tires, even in humid or damp conditions, and are recommended for Class 8 rubber wheeled vehicles or smaller.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.