White Sprinter 2002-06 LowTop H1 3 bar ladder roof rack 64" bars Steel
The Vantech H1 steel system can hold up 750 lb. 3 bars evenly distributed. The Crossbars are 2in x 1in rectangular 14 gauge heavy duty. The Cross bar is protected by non-slip plastic bar guard on top. Mounting upright are 11-gauge at the base and are galvanized before powder coating. The Mounting uprights are 8in extra wide base at 16.5in total height. The Base is welded complete onto upright post for complete seal. There are 4 x 1in eyehook per mounting upright. There is absolutely No drilling required, secured with drip rail clamps. The drip rail clamps are 11-gauge steel 2in x 8in dipped in rubber top and bottom. Rubber cap on the upright post prevents wind noise and water leakage. The system Includes 5in ladder stopper to prevent ladder from sliding forward, Ladder stoppers are galvanized and rubber dipped. The system also includes 5.5in ladder guide for easy bungee and tie-down. Ladder guide are galvanized and rubber dipped. Easy turn knob allows quick adjustments and removal of ladder stopper and ladder guide. hook and loop straps secure ladders within seconds up to 75 lbs (Bar guards, Ladder stopper, ladder guide, hook and loop straps only available in our 2,3,4 bar systems). System powder coated for additional protection against rust. The H1 system is made to be vehicle s(more...)
The Vantech H1 steel system can hold up 750 lb. 3 bars evenly distributed. The Crossbars are 2in x 1in rectangular 14 gauge heavy duty. The Cross bar is protected by non-slip plastic bar guard on top. Mounting upright are 11-gauge at the base and are galvanized before powder coating. The Mounting uprights are 8in extra wide base at 16.5in total height. The Base is welded complete onto upright post for complete seal. There are 4 x 1in eyehook per mounting upright. There is absolutely No drilling required, secured with drip rail clamps. The drip rail clamps are 11-gauge steel 2in x 8in dipped in rubber top and bottom. Rubber cap on the upright post prevents wind noise and water leakage. The system Includes 5in ladder stopper to prevent ladder from sliding forward, Ladder stoppers are galvanized and rubber dipped. The system also includes 5.5in ladder guide for easy bungee and tie-down. Ladder guide are galvanized and rubber dipped. Easy turn knob allows quick adjustments and removal of ladder stopper and ladder guide. hook and loop straps secure ladders within seconds up to 75 lbs (Bar guards, Ladder stopper, ladder guide, hook and loop straps only available in our 2,3,4 bar systems). System powder coated for additional protection against rust. The H1 system is made to be vehicle s(more...)
The 11 gauge drip rail clamps keep the mounting bases in place, allowing the steel system to be installed without drilling. Once assembled, the low top models are 16-1/2" tall while the high top designs are 22-1/2" tall. A 5" ladder stopper comes with the system to prevent ladders from sliding forward during transport while a 5-1/2" ladder guide is also included as an extra bungee or tie-down point. The ladder guide and stoppers are adjusted by easy turn knobs to quickly adjust or remove from the van roof rack system. Ladder guides, stoppers, and drip rail clamps are all rubber dipped to reduce noise made during transport.
Each mounting base has two eyehooks for additional tie down points. A hook and loop strap is also included to help keep ladders up to 75 lbs in place.
