Race Ramps™ Trailer-Mates Solid Car Trailer Ramps for Front Tires - 3,000 lb. Capacity

Trailer Mates add 3" of ground clearance so that you have more room to reach your vehicle's tie-down points, and in some cases, open the door over the trailer wheel well. This set of two front Trailer Mates feature a concave depression that helps keep the vehicle from rolling during transport. Each lightweight ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The front Trailer Mates have a 11-degree approach angle to smoothly lift low profile cars.

Trailer Mates add 3 inches of ground clearance so that you have more room to reach your vehicle's tie-down points, and in some cases, open the door over the trailer wheel well. The front Trailer Mates feature a concave depression that helps keep the vehicle from rolling during transport. The rear Trailer Mates are designed to simply drive right over, making placement a snap. Each lightweight ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The front Trailer mates have a 7-degree approach angle, and the rear Trailer Mates have a 10.9-degree approach angle.

These ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.