Tru-Cut™ Ultra-Ramps Steel Truck Service Ramps - 5,400 lb. per Axle / 9,000 lb. GVW

The Tru-Cut Ultra-Ramps Steel Truck Service Ramps are ideal for easily raising most trucks, cars, or SUVs for service and maintenance. These ramps feature a stamped steel structure with heavy-duty raised grip holes for extra traction with solid steel supports, and support up to 5,400 lbs. per axle (for a total vehicle weight of up to 9,000 lbs.).

An angled wheel stop alerts drivers when they're at the top of the ramps. Each ramp measures 35" L x 13" W x 9.25" H, which includes an 11" x 9" platform at the top.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.