Race Ramps™ 10" W FlatStoppers Car Storage Ramps - 4 Pack

Prevent your vehicle's tires from developing flat spots after long periods of storage with this set of four Race Ramps™ 10" FlatStoppers. The lightweight and durable design features a concave surface that fits tires up to 28" in diameter to evenly distribute the weight of the vehicle and prevent the tires from developing flat spots. FlatStoppers won't conduct heat from asphalt or concrete surfaces, further extending the life of the tires, thanks to their high-density foam construction. These tire supports weight only 6 lbs. each and can support up to 6,000 lbs. per set of four. They are proudly made in the USA.

FlatStoppers have been saving thousands of tires worldwide while they're stuck in winter or long-term storage and they are more affordable than the cost of replacing your tires. When you're parking your car for 30 days or more, simply drive onto our best-selling 28" L FlatStoppers and your tires will settle into the concave depression of the pads to evenly disperse the weight of the car across the increased contact patch and prevent flat spots. This set of four 10" W FlatStoppers can accommodate tires up to 8" W, and has a total weight capacity of 6,000 pounds (each FlatStopper supports up to 1,500 pounds). After the 8.9-degree approach incline, the depression follows the natural shape of your tire to keep it in great condition until the next time you drive, and repositioning the ramps is easy as they only weigh 1.5 pounds apiece.

FlatStoppers are constructed of 100% solid, high-density foam.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use a jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.