Race Ramps™ 20" Restyler Wrap Ramps with Xtenders - 6,000 lb. GVW Capacity per Pair

The 20" W Restyler Ramp Classic Kit is a smart choice for lifting up vehicles during vinyl wrap installs, as well as display or maintenance. Featuring a capacity of 6,000 lbs. and a modular design that makes them easy to transport and store, these car lift ramps are perfect for auto enthusiasts or professionals looking for an easy way to elevate vehicles. The 20" width accommodates tires up to 18" wide, and the no-fold Xtenders reduce the angle of approach to 6.8 degrees so that low profile cars can easily clear the ramps as they mount the platform.

Manufactured with Race Ramps technology, this ramp system has a solid foam core with a tough, high-traction coating that won't damage garage floors.

The 20" Restyler Ramp Classic Kit includes 10 interlocking pieces (five per side), and two no-fold ramp Xtenders (one per side).

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.