Skip to Main Content Skip to Footer Content
Call Us Today! Experts now available 24/7.

10,000 lb Step Deck Trailer Ramp Kit

Ships today!
In Stock Item
  • Manufactured with lightweight aluminum for durability and strength
  • Extra-wide plate style serrated cross bars offer maximum traction in the rain, mud, or snow
  • Load vehicles from the front, back or top step deck with one ramp system
  • Ramps are rated at 10,000-lbs per axle
  • Strongest, lightest ramps on the market

Lightweight portable aluminum trailer ramp system can be used as 8' long ramps or a 16' long modular ramp system with adjustable support stands for loading vehicles up to 10,000 lbs per axle.

These commercial trailer ramps are the lightest aluminum ramps on the market that are rated at the 10,000 lb max axle weight capacity. The 10,000 lbs per axle weight rating means that these ramps can be used to load cars, pick-up trucks, Hummers or commercial trucks up to class 6. They work for most trailers up to 40" high including: step deck trailers, flat bed trailers, loading docks, vans or other trailers that can accommodate a skid seat ramp attaching bracket. This trailer heavy duty ramp system breaks down into multiple sections each weighing 59 lbs each allowing it to be set up easily in a matter of minutes. Make sure to purchase our optional ramp storage hangers to store the complete system underneath the deck of your trailer. The ramp ends pin to a center support stand that is adjustable to multiple heights and the skid seat ramp bracket on the trailer or loading dock. Take note that the adjustable support stands used at the center on each side of this ramp kit can change the loading angle onto step deck trailers, loading docks and flat bed trailers by creating an offset angle or an arch. Skid seat brackets are REQUIRED for this system and the brackets are available in steel or aluminum. Each skid seat bracket must be welded or bolted to the trailer or loading dock for safety & versatility. The wider the skid seat bracket that you purchase the more you're able to change the width of the ramps to accommodate different vehicles or equipment. It is proven that this step deck system will pay for itself by freeing up additional space on your drop deck trailer allowing room to haul an extra vehicle or more freight cargo. *Notice: Our high quality step deck ramps have been designed by an Engineer with 30 years experience in the loading industry and are the lightest, strongest ramps on the market. Beware of cheap imitation stepdeck trailer ramp systems being sold using a knife cut (smooth taper) at the bottom of the ramp to save manufacturing costs, they are bending the toe at bottom of the ramps causing them to break. Our well designed heavy duty ramps have a reinforced pinned toe at the bottom of the ramp so they may be used as a 16 foot long modular system with adjustable support stands, upper step deck trailer ramps using the 8 foot ramps by themselves or used as 8 foot ramp on the rear of the trailer without bending the bottom of the ramp. Lockable Ramp Hangers & Support Stand Hangers allow the entire ramp system to be stored along the frame of the trailer. We offer a single ramp hanger designed for low clearance trailers or a double hanger that will allow you to store 2 ramps in one hanger. The stand hangers also come in 2 different models. We offer a rear stand hanger for mounting the support stands behind the rear tandem axle (53' trailers). The front stand hanger will mount the stands in front of the rear axle.

Ramp Kit
10,000 lbs. per axle
360 lbs.
Not recommended for trucks with mounted cranes, forklifts, or steel track vehicles. Never exceed the maximum axle capacity of this ramp system. Pin End Ramps must be pinned into skid seat brackets before using ramps. The best way to determine your vehicles axle weight is to drive the heaviest axle of the vehicle on a scale. Normally the front end of the truck is the heaviest axle weight because of the engine.
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to
Product Q&A
Warranty Badge
General Warranty Information
  • Discount Ramps offers a Five-Year Warranty and guarantees this product to be free of defects at the time of receipt. Please note that all warranty claims must be made directly to the original place of purchase.
Warranty Service
  • If you wish to submit a warranty claim, please contact us promptly at (888) 651-3431, Mon - Fri from 8am to 5:30pm CST.
  • Please be prepared to submit photos to assist our staff with processing your claim. Any defects will be determined by Discount Ramps with relevant evidence. If a defect is confirmed, Discount Ramps will replace the defective part with the same or similar product at no charge. The purchaser is responsible for labor charges.
Warranty Limitations
  • This warranty is non-transferrable, and becomes void if the product has been misused, neglected, altered, damaged or tampered with.
  • The product manufacturer reserves the right to substitute, discontinue, alter or modify any product or part at any time without notifying the purchaser. If this product is discontinued or modified prior to the warranty claim, Discount Ramps will substitute the defective product or part.
  • Products not manufactured by Discount Ramps are covered under the warranty of their manufacturer.
Limited Liability
  • Discount Ramps shall not be held liable for any damages that arise from the use of this product, including and not limited to property damage, loss of value of the product or loss of use of the product.