Titan Ramps Heavy-Duty Aluminum Semi-Truck Riser Ramp - 20,000 lb. GVW Capacity per Pair

The Titan Ramps Aluminum Heavy Duty Riser Ramps for large semi-trucks and 18 wheelers allow you to drive up the ramp for servicing or for displaying on the semi on your lot. The aluminum ramp is light weight and durable, providing a total of 10 tons or 20,000 lb. of capacity. The length of the ramp is 43" to the top platform that is 20.5" long.

These heavy-duty ramps will raise your vehicle 9" from the ground, providing plenty of room for servicing the under carriage and routine maintenance such changing the oil and replacing filters and plugs. The 16.75" W ramp provides plenty of tire width when driving on or off the aluminum truck ramp.

Weighing only 90 lb. combined, setting up these riser ramps is quick and painless, and the ramps can be stacked for convenient and compact storage.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.