Race Ramps™ Solid Car Show Ramps - 1,500 lbs. per Tire Capacity

The Race Ramps™ Solid Car Show Ramps feature a 14" wide approach. These ramps are manufactured from high-density foam with a high-traction coating, which means they are lightweight (only 5 lbs. each) and support up to 1,200 lbs. per ramp. The versatile drive-on car ramps should be used with cars that have ground clearances of 5.25" or more.

US Patent #2514806, #RE41,581.

These Show Ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.