MotoTote Steel Motorcycle Carrier - 600 lbs. Capacity

The Moto-Tote sport bike carrier is the perfect solution for hauling a sport bike when a trailer or ramps are not available. The motorcycle carrier is designed to fit on class III or IV, 2 inch square hitch receivers, and is rated for all classes of motorhomes. This sport bike carrier has a 600 lbs. weight capacity and is manufactured from black powder coated steel for maximum durability. The finish on the moto-tote is black powder coated to protect from the elements.

The track on the motorcycle carrier is 3" deep and 8-1/2" wide at the back and tapers down to 5" in the front allowing for wheel accommodations of most sport bikes today. This sport bike carry can accommodate motorcycles with wheelbases up to 65". Included with the sport bike carrier is a loading ramp for loading your bike onto the carrier! The ramp attaches right to the carrier when not in use for convenient access! The carrier has a Zero-Wobble design which will keep the carrier stable when transporting! Be sure to check your vehicles hitch rating and suspension carrying capability before loading your motorcycle.

Never exceed the lowest maximum rating of either of these two: vehicle's tongue weight and vehicle's trailer hitch tongue weight. Be aware that your hauling weight may be limited by your vehicle's suspension. Some vehicles may require air shocks or heavier springs to stiffen up the suspension and prevent sagging. Carriers are not recommended for hitches less than 12" from the ground to the bottom of the hitch without the use of a riser adapter. Will not work with 1.25" Class II or smaller hitch receivers.