Black Widow ATV Lift Table, Air/Hydraulic - Build Your Own Shop Kit

The Black Widow Car Lift and Service Ramps are made from heavy-duty black polyurethane, and are perfect for raising cars, trucks, SUVs, and vans for service and maintenance. The two-piece design allows users to remove the ramp section once their vehicle is raised for better underbody access.

Lightweight at 20 lbs. each, they have an open channel grid design so that snow, water, dirt and debris pass through easily. With a 13,000 lbs. GVW capacity, these ramps can handle nearly any vehicle from coupe to truck. Measuring 52" L x 15" W x 8" H, these ramps also feature rubber feet to prevent slipping while in use.

• Lifts a car up 6.5" for service or repair; 9.5° approach angle
• Ramps measure 52" L x 15" W x 8" H and support up to 6,500 lb. per axle (13,000 lb. GVW)
• Curved tire stops to insure proper positioning of vehicle on ramps
• Two-piece design allows for greater access to the bottom of a vehicle when in use.
• Open channel grid design; anti-slip rubber pads prevent ramps sliding on smooth surfaces
• Sold in pairs
• Manufactured of heavy duty, black polyurethane

The Black Widow Wheel Dolly and Positioning Jack Four Pack helps to maneuver vehicles, ATVs and UTVs around garages, body shops, showrooms, parking garages and other level-surfaced area where space might be limited. Constructed of reinforced steel, each jack dolly has a black powder-coat finish and is designed with a hydraulic mechanism that allows the wheels to compact inwards while they lift the tire up to 4-1/4" off the ground. Each positioning jack can support up to 1,500 pounds per wheel, and two are required to move a vehicle by non-braking wheels. A safety locking pin holds the dollies in lifted position while moving, and foot pedals on each unit have a locking hook for added safety. Integrated carrying handles makes them easy to move around your space.

• Reinforced steel construction with a black powder-coat finish
• Lift and maneuver cars, ATVs and UTVs in your garage, body shop, showroom and similar locations
• Hydraulic foot pedal compacts rollers inward to lift tires upward for 4-1/4" of lift
• 4" Diameter smooth rolling casters with 360 degrees of movement
• Heavy-duty 1,500-pound capacity hydraulic wheel skates
• Built-in locking foot pedal hooks, dolly locking pins; integrated carrying handles
• Pack of four

The Black Widow Hydraulic Motorcycle & ATV Jack makes it easy to service and clean your motorcycle or ATV. This high-quality motorcycle jack has a 1,500 lb. lifting capacity to handle even the largest of machines, and raises from 4.875" to 16" H. No more bending down to work on or clean your motorcycle.

Four integrated tie down strap loops secure the bike to the cycle jack, and protective rubber pads (each 13.375" x 2.75") come standard to prevent scratches to the frame and keep the motorcycle from sliding around. A spring assisted hydraulic foot pedal with non-skid rubber padding lets you keep two hands to hold the motorcycle or ATV while lifting, and it can be used with an air compressor (90 psi minimum).

The rear caster wheels have ball bearing swivels to roll around the garage when working on the motorcycle or ATV. The removable jack handle makes it easy to move the lift around the shop while unoccupied. Safety lock arms with three lock positions keep the jack from lowering for added safety.

• Manufactured from durable, powder-coated steel
• 1,500 lbs. weight capacity
• Raises bikes 4.875" to 16" off the ground
• Easy, quick release, hydraulic foot pedal
• Integrated tie-down strap loops
• Three position safety lock
• Removable jack handle and 5.125" collapsed profile for easy storage

An absolute must-have item for any mechanic is a quality shop seat. Comfortable and kind to your back and knees, this mechanic's stool gives you the ability to work in lower areas with ease. It features five swiveling caster wheels that glide along the floor and a padded, height-adjustable swiveling seat. Below the seat and just above the wheels is a handy tool tray for your small parts and tools.

• Helps reduce stress on knees and back
• Five swiveling caster wheels for easy movement
• Pneumatic adjustable seat height
• Swiveling, foam-padded seat
• Bottom tray conveniently holds tools or parts
• Compact and easy to store

Secure your ATV without taxing your suspension. Mac's ATV Wheel Net Pack is the ideal way to transport your ATV. By eliminating the suspension preloading required by conventional tie down straps. With Mac's ATV Wheel Nets, you secure your ATV by the tires, allowing the ATV's suspension to remain active and the tie-downs to remain tight for the entire trip.

This pack includes four ATV wheel nets with ratchet mechanisms and flat snap hook ends, and one large canvas storage bag. A snug-fitting wheel net is critical to ensuring your vehicle is well secured. Our ATV wheel nets are adjustable and specifically designed to fit 24" to 26" diameter tires. With conventional tie-down straps, you attach to the chassis and draw down to generate sufficient compression in the shocks to hold the vehicle in place. This constant load on the suspension, coupled with loads experienced during transit, can elevate the risk of blowing a shock seal. A change in compression could lead to slack, which can increase the load spikes, unduely stressing the strap material.

Mac's ATV Wheel Nets avoid these complications by locking the tires in place. By affixing the tires, the ATV's suspension is allowed to operate as designed, absorbing the shocks of the road. And isolated from the chassis movement, the wheel nets maintain their tension as well at the end of the road as when you started. ATV owners sometimes choose to swap out their OEM tires for larger aftermarket sizes, at a later date. Our Adjustable ATV Wheel Net includes an adjustable leg, so if you do change tire size you can use the same wheel nets. With a simple adjustment, this pack will fit a wide range of tires.

• What's included: (4) ATV wheel nets, (1) large canvas storage bag
• Premium nylon webbing with double box stitch pattern to ensure maximum tear resistance
• Easy-release ratchet mechanism reduces stickiness

Protect ATVs, motorcycles, UTVs, snowmobiles, wheelchairs, powerchairs, or equipment for your lawn and garden when using hook end tie-downs. Simply cinch the soft loop and hook the tie-down to it instead of a bare equipment frame. Soft Loops are specifically designed to protect powersport and utility equipment frames when using hook end tie-downs for hauling. Each soft loop wraps around the frame, loops through itself, and cinches tight to provide an extended soft tie-down point. The tight cinch creates a larger surface area hold point and is less likely to slide around when subjected to heavy travel vibrations. Great for adding tie-down points where the strap hook may be too big or too small to work properly. Soft loops will not scratch the surface of a motorcycle, ATV, snowmobile, UTV, powerchair, wheelchair, or lawn and garden equipment vehicle. Any time strap hook tie-downs are being used to secure equipment for travel, it's highly recommended to use soft loops with those tie-downs to protect the vehicle finish and further stabilize the tie-down system.

• Protect motorcycles, ATVs and other equipment when using hook end tie down straps
• Wrap around handlebars and frames for added tie down points
• 3,000 lb. break strength / 1,000 lb. working load
• 12"L x 1"W

Quality tie downs that won't let you down, these ratcheting straps are great for your general purpose cargo such as ATVs, motorcycles, lawn equipment, and more. These straps have a 3,000 lb. break strength / 1,000 lb. working load and come in bright orange for improved visibility and added safety.

Measuring 10' long, our ratchet straps come in an orange color for improved visibility. The S-hooks on these tie down straps feature a vinyl coating to help prevent scratching of the cargo or the cargo hauler. To protect paint and finish even further, consider using these cam straps with some of our soft loops. For years of reliable service, the ratchets are zinc coated. The 10' ratchet straps are sold in sets of 4 and come with a 1 year manufacturer's warranty.

• 3,000 lb. maximum break strength and 1,000 lb. working load limit
• Vinyl coated S-hooks protect cargo and vehicle from scratches
• Sold in packs of four straps