Discount Ramps is open and shipping product. details

iDeal Electric Hydraulic ATV Frame Lift

$2,499.99
UF-2200EH-X
In Stock
  • Manufactured from durable, powder-coated steel
  • 2,200 lb. Weight capacity
  • 67" L x 24" W platform with two 11" L x 24" W flip-up platform extensions for larger ATVs
  • Designed to lift ATV and UTV frames
  • 110V Integrated electric/hydraulic power unit -no air compressor needed
  • 4-3/4" to 43" Lift height range with three locking position and electro-magnetic lock release
  • Includes rubber contact lift pads, pedestal stand with anchor holes, control panel

The iDeal Pro-Series ATV Frame Lift Table is an innovative and versatile addition to your shop or garage, allowing you to service your ATV, motorcycle, or other equipment. Manufactured from durable, powder-coated steel, this lift comes with a 2,200-pound weight capacity and has a small footprint (89" L x 24-4/5" W) because unlike other lifts, it is designed to engage your vehicle’s frame instead of the wheels. The 67" L x 24" W heavy duty diamond plate platform can be extended with two included load-bearing, flip-up platform extensions (each 11" L x 24" W) for a maximum length of 89" to accommodate larger ATVs and UTVs. Four rubber contact pads (each 6-1/2" x 4-3/4") are provided to prevent scratches to your vehicle’s frame.

This lift table operates on 110V, 60Hz, 1PH-18A power and can be fully raised or lowered in 25 seconds. It releases electro-magnetically. Operation doesn’t require an air compressor, and the electric and hydraulic system is quiet and efficient. It has three locking height positions at 28", 36-1/2", and 42". The control panel fits into a pedestal stand (15" L x 11" W x 39" H) that houses the power unit and offers a small area for miscellaneous storage (9" L x 11" W x 1-1/2" H). The pedestal and platform can be a maximum distance apart of eight feet, and the base of the lift and the pedestal stand comes with anchoring holes for optional permanent mounting.

24-4/5"
4-3/4"
4-3/4"
43"
67"
2,200 lbs.
740 lbs.
100V Electric/Hydraulic Power Unit
No
No
No
No
Not Included
Steel
Please use this lift on a level, concrete surfaces with a recommended minimum thickness of four inches. Do not install on an asphalt surface. Never move the lift when a vehicle is loaded, and try to avoid excessive rocking of any lifted vehicle. To reduce the risk of electric shock, please do not operate the lift when wet, and do not use it in an uncovered area where it could be exposed to rain.
Reviews
Product Q&A