Race Ramps™ 16" Restyler Approach Ramps

Connect these Race Ramps™ 16" Restyler Approach Ramps to your 16" Restyler Ramps so you can easily drive your vehicle straight off of the ramps after you've finished working on it. They feature an interlocking design to make installation quick and easy.

US Patent #2514806, #RE41,581.

These inclines are manufactured using an exclusive, patented process. It is constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. It won't slide on any surface, including garage and workroom floors.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.