Skip to Main Content Skip to Footer Content

Overstock Sale: Up to 80% Off! Shop Now!

Race Ramps™ 9" H Trailer Ramps with Flap Cutout - 6,000 lb. GVW Capacity per Pair

$912.21
ITEM #RR-TR-9-FLP
Free Shipping

Key Features:

  • Load low-clearance vehicles on/off trailers with door flaps without scraping; safely reduces approach angle to 5.5°
  • Ramp measures 7' 11" L x 14" W x 8" H and support 6,000 lb. GVW
  • Accommodates tires up to 12" W

See More…

Overview
Specifications
Made in the USA
Length:
7' 11"
Width:
14"
Height:
8"
Weight:
12
Maximum Capacity:
1,500 lbs.
Material:
Expanded foam with traction coating
More Information

The 9" Race Ramps™ Trailer Ramp with Flap Cutout is designed to safely and easily load low ground clearance vehicles on and off trailers without scraping, and provides a safe alternative to wooden planks and other unstable alternatives. Simply place the trailer door on the notch of the ramp to reduce the angle of approach to only 5.5 degree. The 9" Trailer Ramps provide a nesting cut-out for a door flap up to 18" and are divided into two pieces for easy storage and portability. This lightweight, durable trailer ramp can support vehicles weighing up to 6,000 lbs. and features a textured coating to prevent sliding. Built-in straps make it easy to transport the Race Ramps™ or hang them conveniently on a wall when not in use.

These trailer ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable.

  • Load low-clearance vehicles on/off trailers with door flaps without scraping; safely reduces approach angle to 5.5°
  • Ramp measures 7' 11" L x 14" W x 8" H and support 6,000 lb. GVW
  • Accommodates tires up to 12" W
  • Trailer door rests in 5" L x 1" H notched ramp edge to create gentler loading slope; 18" flap depression accommodates trailer door flaps between 14" - 18"
  • Comes with handy strap for easier transport
  • Sold in pairs
  • Manufactured in the USA from 100% solid lightweight high-density foam with traction coating
Usage Guidelines
Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.
Race Ramps Instruction Manual
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Trailer Ramp Trailer Configurator
Reviews
The average rating for this product is 5 out of 5 stars 8 Reviews
Q&A