Race Ramps™ 4" H Car Lift Ramps - 4 Degree Angle of Approach
$1,468.96
Key Features:
- Made in the USA from 100% solid lightweight high-density foam with traction coating
- Easily get your low-to-the-ground car on scissor and 2-post lifts
- Accommodate tires up to 12" wide and wheelbases from 80" to 115"
Similar Products
Overview
Overview
Specifications
Made in the USA
Maximum Capacity:
3,000 lbs.
Weight:
80 lbs.
Length:
185"
Width:
14"
Height:
4"
Lift Height:
4"
Maximum Tire Width:
12"
Approach Angle Degree:
4°
Material:
Foam
Color:
Black
Sold As:
Pair
Brand:
More Information
There's nothing as frustrating as trying to work on a car only to realize that it won't fit on your shop or home lift! Luckily, these 4-inch Car Lift Ramps make it easier than ever to get that low vehicle up on a scissor or 2-post lift.
They come as a pair; each ramp weighs about 40 pounds total and is compromised of four interlocking pieces. Each side can hold up to 3,000 pounds for a total vehicle weight capacity of 6,000 pounds. Featuring a nice, easy 4 degree angle of approach, they are sloped enough to accommodate the majority of lowered and low profile vehicles. The 185-inch length supports wheelbases from 80 inches to 115 inches long, and the 14-inch width is perfect for tires up to 12 inches wide.
These lift ramps are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won't slide on any surface, including garage and workshop floors.
- Made in the USA from 100% solid lightweight high-density foam with traction coating
- Easily get your low-to-the-ground car on scissor and 2-post lifts
- Accommodate tires up to 12" wide and wheelbases from 80" to 115"
- Four interlocking pieces per ramp weigh only 40 lbs.
- Set of two
Usage Guidelines
Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.
Reviews
Reviews
Q&A
Q&A