8' L x 16" W 4 Bunk Load Leveler / 4 Ramp Master Kit for 16" H Step Deck Trailers - 20,000 lb. Capacity
$9,410.99
Pricing shown as of 4/30/2026. Please note that prices are subject to change without notice.
Key Features:
- Manufactured in the USA from high-strength, lightweight aluminum - no component weighs more than 94 lbs.
- 20,000 lb. per axle weight capacity
- Kit includes four 8' L x 16" W x 5" H aluminum ramps with pin-on ends, eight stake pocket supports for load levelers, twelve lumber securing clips, two adjustable ramp support stands, two pairs of lockable bolt-on ramp hanger brackets, one pair of lockable bolt-on stand hanger brackets, and four 36" aluminum ramp attaching brackets
Similar Products
Accessories For #20-16-192-02-02-MLL-4-KIT
Overview
Overview
Specifications
Made in the USA
Description:
4 Bunk Load Leveler Master Kit
Maximum Capacity:
20,000 lbs. per axle
Length:
16'
Width:
16"
Height:
6"
Weight:
653 lbs.
Material:
Aluminum
Brand:
More Information
Affordable, lightweight, and safe, this innovative ramp system converts to load levelers to maximize step deck capabilities. This convenient system is an essential tool for 102" wide drop deck trailers with a 16" upper step drop. Adjustable stakes ensure the load levelers will fit all 102" wide step deck trailers without any modifications.
The safest system on the market, our load levelers and stake pockets are secured directly to your step deck trailer, preventing kick-outs caused by short stops or chain failure. Simply slide inserts over the pin end of the ramps into your stake pockets, then chain them down with load binders for unbeatable security. For maximum safety, each step deck kit includes three lumber clips and two stake pocket inserts per load leveler.
This kit includes four 8' L x 16" W lightweight ramps, two adjustable lower ramp support stands, eight stake pocket supports for load levelers, twelve lumber securing clips, two pairs of lockable bolt-on ramp hanger brackets, one pair of lockable bolt-on stand hanger brackets, and four 36" aluminum ramp attaching brackets. The modular design of these step deck systems allows you to add on pieces when necessary, and gives you the ability to easily replace pieces as needed. Browse our variety of step deck products for step deck add-ons and other accessories. Please note, ramps must be pinned into skid seat brackets before use.
- Manufactured in the USA from high-strength, lightweight aluminum - no component weighs more than 94 lbs.
- 20,000 lb. per axle weight capacity
- Kit includes four 8' L x 16" W x 5" H aluminum ramps with pin-on ends, eight stake pocket supports for load levelers, twelve lumber securing clips, two adjustable ramp support stands, two pairs of lockable bolt-on ramp hanger brackets, one pair of lockable bolt-on stand hanger brackets, and four 36" aluminum ramp attaching brackets
- High-traction ramp surface works in all weather conditions
- Specifically manufactured for 16" H step deck trailers
- Load levelers fit 102" wide trailers
Usage Guidelines
Rated at 20,000 lbs. per axle; Never exceed the maximum axle capacity of this ramp system; Not recommended for trucks with mounted cranes, forklifts, steel track vehicles. Must use a true 6" wide lumber for the load levelers (2x8's cut down).
Features
Ramps/Load Levelers
These ramps are used for loading, or can be turned on their side and used as load levelers. The width of the ramps will vary based on the height of your step deck to ensure that when they are used as load levelers they will be the appropriate size.
Ramps/Load Levelers
These ramps are used for loading, or can be turned on their side and used as load levelers. The width of the ramps will vary based on the height of your step deck to ensure that when they are used as load levelers they will be the appropriate size.
Ramp Support Stands
These not only ensure that the two ramps per side will be able to support the loading weight of your cargo, but they are also adjustable in case you need to create a slight arch to help with the loading process. This is important with vehicles or machinery that have a long wheelbase and/or lower ground clearance, so they don't high-center at the top of the ramps.
Ramp Support Stands
These not only ensure that the two ramps per side will be able to support the loading weight of your cargo, but they are also adjustable in case you need to create a slight arch to help with the loading process. This is important with vehicles or machinery that have a long wheelbase and/or lower ground clearance, so they don’t high-center at the top of the ramps.
Load Lever Spacers
These are sized to be used with 24” and 26” H step decks. The correct size is included in each kit, and they are placed on top of the load levelers before the lumber clip and dunnage.
Load Lever Spacers
These are sized to be used with 24" and 26" H step decks. The correct size is included in each kit, and they are placed on top of the load levelers before the lumber clip and dunnage.
Lumber Clips
They attach to the load levelers and hold lumber to prevent the levelers from scratching or otherwise damaging your load. When pacing lumber, always use wood planks that are true to size to ensure a secure fit. Kits include 3 lumber clips per load leveler.
Lumber Clips
They attach to the load levelers and hold lumber to prevent the levelers from scratching or otherwise damaging your load. When pacing lumber, always use wood planks that are true to size to ensure a secure fit. Kits include 3 lumber clips per load leveler.
Stake Pocket Supports
They keep your load levelers in position by securing them at stake pocket locations, so you can customize where you place your levelers. Kits include 2 stake pockets supports per load leveler. A chain will be passed over the top to secure them, and the load levelers in place for transit.
Stake Pocket Supports
They keep your load levelers in position by securing them at stake pocket locations, so you can customize where you place your levelers. Kits include 2 stake pockets supports per load leveler. A chain will be passed over the top to secure them, and the load levelers in place for transit.
Ramp Hanger Brackets
These particular brackets are only to be used on trailers without knee braces. They bolt on, and the ramps slide in for storage.
Ramp Hanger Brackets
These particular brackets are only to be used on trailers without knee braces. They bolt on, and the ramps slide in for storage.
Stand Hanger Brackets
These brackets hold the ramp support stands in place during transit and when they’re not in use.
Stand Hanger Brackets
These brackets hold the ramp support stands in place during transit and when they re not in use.
Ramp Attaching Brackets
These must be welded to your drop deck before use, and include long pins to secure the ramp to the deck. This prevents the ramp from kicking out as you load.
Ramp Attaching Brackets
These must be welded to your drop deck before use, and include long pins to secure the ramp to the deck. This prevents the ramp from kicking out as you load.
Reviews
Reviews
Q&A
Q&A