Race Ramps™ XTenders Solid Extensions for Car Tow Ramps - 10,000 lb. GVW Capacity per Pair

Race cars and low sports cars sometimes need an even more gradual incline to prevent the underbody from scraping. These Race Ramps™ XTender ramps from Brute fit over the 7-10 tow truck ramps to lower the approach angle to just 3 deg.. Manufactured from the same solid core material as the tow ramps, these XTenders have an anti-skid texture that keeps them in place and won't damage garage or shop floors and can accommodate up to 5,000 lbs. per axle.

These extenders are constructed using an exclusive, patent process. They are 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong yet durable. They will not slide, scratch, or otherwise damage any floor type. The reinforced bottom allows them to grip tow ramps and to be used on gravel or other rough surfaces that you may encounter along the side of the road.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicle.