Skip to Main Content Skip to Footer Content
Call Us Today! Experts now available 24/7.

Race Ramps™ Solid Car Tow Ramps for Flatbed Tow Truck - 5,000 lb. Per Axle Capacity

Select Length
Select Description
ITEM #BT-TT-7-10
Free Shipping
Made to Order, 6-8 Week Lead Time

Key Features:

  • Manufactured from 100% solid lightweight high-density foam with traction coating
  • Measures 6' 2" L x 10" W x 7" H
  • Decrease angle of approach to as little as 5.2 degrees

See More…

Made in the USA
6' 2"
Maximum Capacity:
2,500 lbs.
More Information

Race Ramps™ 7" tall tow truck ramps are a safe, professional way to load exotic cars and other vehicles with little ground clearance onto flatbed tow trucks. These extension ramps lower the approach angle to a mere 5.22 deg., preventing damage to the car's undercarriage and bodywork. Unlike wooden planks, which can slide out from underneath the vehicle while loading, Tow Ramps feature an anti-skid coating that prevents the ramps from sliding, and won't damage floors. Stability is also increased with the built in rollback rest notch, which creates a smooth transition from the tow truck ramp extensions to the flatbed. Built with Brute Industries patented solid core construction, the Race Ramps™ tow truck ramps are highly durable and can support a car weighing up to 10,000lbs. Despite this heavy duty capacity, Tow Ramps weigh only 13.5lbs. each, making them easy to transport. Race Ramps™ tow truck extension ramps are easy to clean and won't rust. All Race Ramps™ are made in the USA. Sold in pairs

US Patent #D593,724, #2514806, #RE41,581.

These ramps are constructed using an exclusive, patent process. They are 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong yet durable. The ramp will not slide, scratch, or otherwise damage any floor type. The reinforced bottom allows the ramp to be used on gravel or other rough surfaces that you may encounter along the side of the road.

  • Manufactured from 100% solid lightweight high-density foam with traction coating
  • Measures 6' 2" L x 10" W x 7" H
  • Decrease angle of approach to as little as 5.2 degrees
  • 5,000 lb. per axle weight capacity
  • Single piece design
  • Set of two
Usage Guidelines
Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicle.
Race Ramps
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to