
The cargo hitch carrier has a huge 500 lb weight capacity for hauling coolers, boxes, tools, firewood, and many other belongings you may not be able to fit into your vehicle. The carrier has a “basket” structure which includes a usable 48" x 18.25" x 5" steel mesh surface, 5" steel tube rails, and a heavy duty 2" steel hitch tube which fits into your hitch receiver providing primary support for the cargo carrier. The side rails also feature holes for securing your gear with a cargo net. Overall dimensions of the basket cargo carrier are 50" x 20" x 6". A glossy black powder coat covers the carrier and hosts a suitable defense from rust, road grime, and outdoor elements.
To install, just slide the main support tube into your trailer hitch receiver and insert a hitch pin to keep the basket from sliding out during travel. The carrier only weighs 28 lbs making installation only a one person job. (A hitch pin is NOT included but can be purchased separately.) This style of cargo carrier will work with 2", class III or greater hitch receivers. Trailer hitch receivers recessed up to 6.5" can use this carrier too! Optional 1-1/4" - 2" adapters are available to allow the carrier to work in class II receivers. Included with the cargo hitch carrier is a 1 year warranty! Please Note: Exceeding your trailer hitch rating may result in product failure and personal injury.
Need a hitch for a cargo carrier? Check out the Hitch Selector to find a trailer hitch for your vehicle!
Cargo Carrier Image Gallery

- Mesh bottom and 5" side rails to better secure cargo
- Glossy black powder coat finish
- 1 year warranty
- 500 lb carrying capacity
- Heavy duty steel tubular construction
- Usable size 48" x 18.25" x 5"
- Will fit trailer hitches recessed up to 6.5" (measured from center of trailer hitch pin to the end of bumper)
- Can be used on a class II trailer hitch with the optional 1-1/4" to 2" hitch adaptor which you can see here
- Requires Class III or IV trailer hitch (2" square hole)
- Weighs only 28 lbs
- Hitch pin NOT included
- Instructions

- Never exceed the maximum tongue rating of your trailer hitch
- Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's suspension to carry a load
- Not recommended for hitches less than 12" from the ground to the bottom of the hitch without the use of a hitch riser adapter
- Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
Cargo Hitch Carrier Product Specifications & Price
| Item # |
Manufacturer |
Description |
Size |
Weight Capacity |
Hitch Size |
Price |
| HCB-4818 |
Rage Powersport Products |
Cargo hitch carrier for hauling extra cargo or gear. |
Useable size: 48" x 18.25" x 5" Overall size: 50" x 20" x 6" |
500 lb capacity ~ weighs 28 lbs(Never exceed your trailer hitch rating) |
Class III or IV (how can I tell?) |
+ 30 s&h
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| CSBG-48 |
48" Cargo Carrier Bag - Weather-seal velcro flaps, 2 interior 16"x8" zippered pockets Size: 48"L x 19"W x 17-21"H 48"L Cargo Carriers |
 Enlarge Image |
+ 12 s&h
|
| SHP-2050-special |
Silent Hitch Pin: For Class I & II hitches - Keeps tow accessories secure and rattle free. Standard lock - Chrome coating - Rubber dust cap on lock |
 Enlarge Image |
+ free s&h
|
| SHP-2030 |
Keeps tow accessories secure and rattle free. Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock For Class III & IV hitches |
 Enlarge Image |
+ free s&h
|
| ANTI-TILT-REV |
Anti-Tilt Locking Device - For Class III or larger trailer hitches. Pinches main tube of tow accessory tight into trailer hitch to eliminate rocking View More Details |
 Enlarge Image |
+ free s&h
|
| A20402 |
Standard Hitch Pin for 2" Class III and IV receivers - 5/8" x 4-3/4" |
 Enlarge Image |
+ free s&h
|
| HP31 |
Locking Hitch Pin for 2" Class III and IV receivers - 5/8" x 2-3/4" |
 Enlarge Image |
+ free s&h
|
| HP125 |
1/2" Trailer Hitch Pin - Fits 1-1/4" Class I or II Hitches view more details |
 Enlarge Image |
+ free s&h
|
| HP32 |
Locking Hitch Pin - For 1 1/4" Class I and II receivers - 1/2" x 2-3/4" - Includes two keys |
 Enlarge Image |
+ free s&h
|
| DRH-1 |
Dual Hitch Extension - Dual Extension Tube for 2" Receivers This hitch extension converts the 2 " receiver tube (Class III and IV) to a hitch with two 2" diameter holes (Class III and IV) for towing with the bottom tube and to use a hitch accessory, such as a cargo carrier or bike rack, on the top tube. Constructed of durable steel with a black powder-coated finish and has a weight capacity of 4000 lbs. |
 Enlarge Image |
+ 15 s&h
|
| HE-2-3 |
1 1/4" to 2" Hitch Adapter View More Details |
 Enlarge Image |
+ free s&h
|
| HE-3-3 |
2" to 2" Hitch Extension View More Details |
 Enlarge Image |
+ free s&h On Back Order Until Mid April 2012
|
| CN1515 |
Small Cargo Net - 15" x 15" Cord diameter: 4.55 mm Number of hooks: 6 |
 Enlarge Image |
+ 4.50 s&h
|
| CN3045 |
Medium Cargo Net - 30" x 45" Cord diameter: 6 mm Number of hooks: 14 |
 Enlarge Image |
+ 6.50 s&h
|
| CN7296 |
Large Cargo Net - 72" x 96" Cord diameter: 6 mm Number of hooks: 32 |
 Enlarge Image |
+ 8 s&h
|
| VH-Strap |
1 inch wide cargo tie down strap kit (2 cam straps- 2 ratchet straps) |
 Enlarge Image |
+ 8 s&h
|
| X12-STR-BAG |
Multi-Purpose Cargo Storage Bag - 24" x 11" x 18" - Great for use at the beach, picnics, or other outings |
 Enlarge Image |
+ 8 s&h
|


|