AMC-600-2 Lightweight Aluminum Double Motorcycle Carrier.

This double motorcycle carrier is constructed of aluminum making it the lightest & most affordable double motocross carrier in the industry! This double motorcycle carrier allows you to transport 2 bikes on a class III or IV trailer hitch without the hassle of pulling & storing a trailer. Includes a 1 year warranty!
100% satisfaction guarantee
Aluminum double motorcycle carrier

The AMC-600-2 double motorcycle carrier is the ultimate solution for transporting two motocross bikes without the complications of pulling & storing a trailer. Don't waste valuable trail riding time, load your dirt bikes on this double motorcycle rack in less than 5 minutes. The AMC-600-2 aluminum double motorcycle rack mounts in your class III or IV 2" trailer hitch and includes a anti-tilt locking device that pinches the main tube into the trailer hitch to eliminate any rocking motion creating a rock solid double motorcycle carrier. The 45.5" long x 5-5/8" wide loading ramp stores directly on the motorcycle carrier with 2 wing nut bolts. This double motorcycle rack has been specifically designed for transporting motocross bikes, enduro bikes, off road dirt bikes & some scooters with larger wheels (limitations may apply with the 16" gap in rail).

The weight capacity of the hitch tube is 600 lbs. and the carrier rail is designed to handle motorcycles up to 400 lbs maximum overall weight (example: 400 lb. bike + 200 lb. bike).The motorcycle carrier rail is 75" long x 5.5" wide and has a 16" gap where the front wheel drops partially into to stabilize the motorcycle, acting as a wheel chock. Please measure your scooter or kids motocross bike to make sure the wheel is large enough so it does not drop through the front wheel gap. Click here to view dimensions of the double motorcycle carrier. This motorcycle carrier also includes a 45.5" lightweight aluminum loading ramp for loading your cycle on the carrier and it conveniently attaches on the carrier next to the carrier track for transport. This motorcycle hitch carrier has a carrying capacity of 600 lbs. so please check your vehicles hitch rating as well as the suspension carrying capability of the carrying vehicle. This carrier comes standard to fit in a 2" square class III, IV, or V 2 inch receiver. This aluminum motorcycle carrier works great for RV's, pick up trucks, vans and SUV's. This double motorcycle carrier is designed for motocross bikes, enduros and scooters with larger diameter wheels. It is not for sport bikes, cruisers or street bikes. If you are looking for a motorcycle carrier for street bikes, see our sport motorcycle carrier. If you are looking to transport one motocross bike, we have an AMC-400 single aluminum motorcycle carrier if you only need to transport one motorcycle.
Need a class III or IV hitch for the AMC-600-2? Check out the Hitch Selector to find a trailer hitch for your vehicle!

Tie down straps are sold separately. We have a quality tie down straps for motorcycle carriers below. We recommend using one basic strap kit per bike and a wheel tie kit to secure your motorcycles.

Click pictures here to enlarge
YZ450 and YZ250 motocross bike on the double motorcycle carrier on a Dodge Ram pick-up truck the AMC-600-2 is the perfect Father & Son motorcycle hauler Double aluminum motocross carrier pictured on a Dodge Dakota pick-up truck Check out the double motorcycle carrier size specifications Motorcycle ramp stores directly on the double motorcycle rack This hitch mounted double aluminum motorcycle carrier is the quickest way to transport your motocross bike to the trails, woods or track anti-tilt locking device keeps this carrier stable and free of rocking Anti-tilt-locking device will not work with hitches that have large chain loops.

AMC-600-2 double motorcycle carrier features include:

  • Anti-tilt device-keeps the carrier stable
  • Lightweight Aircraft Aluminum construction
  • Aluminum construction will never rust
  • Easy Assembly
  • NOT for scooters/mopeds
  • 1 Year Warranty
  • Steel powder coated main hitch tube
  • Designed to safely carry 600 lbs. (Maximum motorcycle weight 400 lb. per carrying rail)
  • Includes aluminum ramp that mounts on carrier
  • Main hitch tube is 18" long from center of hitch pin to center of 1st ramp & 39" to the 2nd carrier track
  • Fits any 2 inch square receiver

Double Motorcycle Carrier limitations:

  • Carrier Carrying Capacity: The AMC-600-2 carrier is designed to safely carry 600 lbs.
  • Hitch Weigh Limit: Most Class III hitches are rated for 500 lbs. Most Class IV hitches are rated for 1000 lbs
  • Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
  • Will not work with class II or smaller receivers
  • Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
  • Please check with your dealer to find out if your vehicle's carrying capacity
  • NOT recommended for tow-behind trailers including 5th wheel trailers & camping trailers
  • NOT for street bikes, cruisers or sport motorcycles
  • Hitch pin NOT included
Find a trailer hitch for your vehicle with the Hitch Selector!
hitch selector


Super low special price for a limited time!
AMC-600-2 aluminum double motorcycle carrier specifications and pricing
Model# Description Track Length Weight Capacity Ramp Length Rung Spacing Track Width Weight Price
AMC-600-2 Hitch Mounted Aluminum Double Motorcycle Carrier 75 inches 600 lbs. 45.5 inches 6 3/4" 5.5 inches 69 lbs +45 s&h
4 Piece Strap kit Includes: 2 heavy duty 1" wide x 6' foot long ratchet straps.  2 heavy duty 1" wide x 6'  long cam buckle straps. 1200 lb. capacity in black. (Click here for more strap info) 4 piece tie down kit
Click Pic to enlarge
+8 s&h
8 Piece Motorcycle Tie down kit Includes: Same high quality straps as above and 4 soft loops to prevent scratching your cycle. (Click here for more strap info) motorcycle tie down kit
Click Pic to enlarge
+8 s&h
Wheel Tie Kit Includes: Two 60" long x 1" wide motorcycle wheel ties for motorcycle carriers motorcycle wheel tie down kit
Click to enlarge
+8 s&h
SHP-2030 Silent Hitch Pin: For Class III & IV hitches - Keeps tow accessories secure and rattle free.
Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock
silent hitch pin
Click to enlarge
+free shipping
HP31 Locking Hitch Pin - for 2" class III and IV receivers - 5/8" x 2-3/4" locking hitch pin
Click to enlarge
+ free shipping
A20402 Standard Hitch Pin - for 2" class III and IV receivers - 5/8" x 4-3/4" standard hitch pin
Click to enlarge
+ free shipping

view shopping cart and check out

Click the links below to see our other available hitch carriers
Aluminum Motorcycle Carrier
Aluminum motorcycle carrier the AMC-400

The AMC-400, ultra light, all aluminum design can handle up to a 400 lb. bike.
Special Price-Only $129.99
Double Aluminum Dirt Bike Carrier
Aluminum double motorcycle carrier the AMC-600-2

The AMC-600-2, ultra light, all aluminum design hauls 2 bikes with no Trailer!
Special Price-Only $239.99
Heavy Duty Sport Motorcycle Carrier
tilt-a-rack tilting motorcycle carrier rack

Lightweight Aluminum & Steel construction - Integrated Wheel Chock - Carries up to 600 lbs
Introductory Price - $259.99
**Always use safety straps and follow manufacturers loading guidelines for the motorcycle hitch carrier and hauling capacities of your tow vehicle. Discount Ramps .Com LLC assumes no liability whatsoever for damage or injury incurred during the use of this product.**
Ramp order line - 1-888-651-3431
search all our loading and hauling products
ramps and loading products