Want to haul two dirt bikes or small motorcycles but don't want the problems of pulling a trailer? The VersaHaul steel motorcycle rack system is the ultimate solution. The VersaHaul double carrier is a motorcycle carrier that mounts using your vehicle's two-inch receiver. Simply roll your motorcycle up the carrier's ramps and use straps to secure the bike to the carrier rails. The optional ramp stores right on the carrier so no room is taken up inside your vehicle. Your motorcycles ride safely behind your vehicle on the two motorcycle racks. Light duty suspension systems may require air shocks or helper springs to avoid rear end sag from the heavy load on the rear of the vehicle. Single motorcycle carriers are also available. Need a Class III or IV hitch for the VersaHaul Double Motorcycle Carrier? Check out the Hitch Selector to find a trailer hitch for your vehicle!
Double Motorcycle Carrier Image Gallery

The VersaHaul Double Motorcycle Carrier Advantage
|
|
- Anti-tilt locking device
- 2 inch x 2 inch x 36 inch holding shaft
- Four retractable tie down bars
- Two 6.375 inch x 71.5 inch carrier track
- Two wheel stop
- Two reflectors
- One loading ramp (RO model only)
|
- Carrier Carrying Capacity: The VH-55DM carrier is designed to safely carry 600 lbs, but is limited to only 500 lbs per rail
- Hitch Weigh Limit: Most Class III hitches are rated for 500 lbs - Most Class IV hitches are rated for 1000 lbs
- Vehicle Hauling Capacity: Your hauling weight may be limited by your vehicle's capacity to carry a load
- Will not work with class II or smaller receivers
- Some vehicles may require air shocks or heavier springs to stiffen up the suspension to prevent sagging
- Please check with your dealer to find out your vehicle's carrying capacity
- NOT recommended for tow-behind trailers including 5th wheel trailers and camping trailer
Find a trailer hitch for your vehicle with the Hitch Selector!

Double Motorcycle Carrier Product Specifications
| Item # |
Manufacturer |
Carrier Description |
Dimensions |
Carrying Capacity |
Weight |
Hitch Size |
Image |
| VH-55DM |
VersaHaul |
Double motorcycle carrier without ramp |
View Dimensions |
600 lbs total - Limited to 500 lbs per carrier rail |
118 lbs |
Class III or IV (how can I tell?) |
 Enlarge Image |
| VH-55DM-RO |
VersaHaul |
Double motorcycle carrier with 60" x 5.5" ramp |
View Dimensions |
600 lbs total - Limited to 500 lbs per carrier rail |
135 lbs |
Class III or IV (how can I tell?) |
 Enlarge Image |
|
Order Here
|
Price |
|
$636.49 - $726.74 + free s&h
$636.49 + free s&h
$726.74 + free s&h
|
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| VH-TK |
Motorcycle Carrier Taillight Kit (92" L harness) Includes (2) Taillights - 8 x 5/32" Screws - One Wire Harness and (7) Vinyl Harness Clips Direct Fit On: VH-55, VH-55-DM, VH-90, VH-SPORT, and VH-LG Carriers VH-MS, VH-50CC, and VH-TRIKE require drilling or use of double sided tape |
 Enlarge Image |
+ free s&h with carrier
|
| VH-HR2 |
5" hitch riser for Class II trailer hitch - 8 lbs |
 Enlarge Image |
+ free s&h
|
| VH-HR3 |
4" hitch riser for Class III trailer hitch Includes anti-tilt locking bracket - 11 lbs |
 Enlarge Image |
+ free s&h
|
| 4S-Loop |
(4) 1" wide x 12" long soft loops View More Details |
 Enlarge Image |
+ 5 s&h
|
| HP31 |
Locking Hitch Pin for 2" Class III and IV receivers - 5/8" x 2-3/4" |
 Enlarge Image |
+ free s&h
|
| SHP-2030 |
Keeps tow accessories secure and rattle free. Barrel lock - Chrome coating - Heavy duty spring nut with counter boring - Sleeve - Rubber dust cap on lock For Class III & IV hitches |
 Enlarge Image |
+ free s&h
|
| VH-070-HD |
Heavy Duty anti-tilt locking device for Class III or larger trailer hitches. Pinches main tube of rack tight into trailer hitch to eliminate rocking (included with all carriers). |
 Enlarge Image |
+ free s&h
|
View Our Other Popular Motorcycle Products
|