Prevent flat spots from ruining expensive tires when storing vehicles for extended periods of time with Flatstoppers tire supports, by Race Ramps. Flatstoppers feature a concave depression, designed to support the weight of the vehicle evenly across the tire. Even on bias ply tires, Flatstoppers put an end to flat spots to ensure that tires remain in great condition. Flatstoppers won't conduct heat from asphalt or concrete surfaces, further extending the life of the tires. Race Ramp's Flatstoppers are made of composite foam, and won't slide or mark up a garage floor. These tire supports measure 22.34" long x 14" wide x 1.5" tall, and are lightweight, weighing only 4 pounds each. A 6,000 lb weight capacity (per set of 4) means Flatstoppers can support nearly any vehicle. If this is not the car ramp you are looking for, then check out our complete line of car ramps
Flat Stoppers Image Gallery
- Includes 4 Flatstopper Ramps
- For storage or extra clearance with a lift jack
- Built with a solid core making these ramps durable and sturdy
- Lightweight ramps weigh only 4 lbs each
- 6000 lb capacity - all 4 ramps combined
- Will not conduct heat from surfaces
- 1 year manufacturer's warranty against defective materials
- Dimensions are 1.5" H x 22.34" L x 14" W to accommodate cars with wide tires
- Made in USA
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
1 Week Lead Time On This Product
Flatstoppers Product Specifications & Price
| Item # |
Manufacturer |
Description |
Dimensions |
Weight Capacity |
Price per 4 |
| RR-FS |
Brute Industries |
(4) Race Ramps - Flatstoppers vehicle storage tire supports |
22.34" long x 14" wide x 1.5" tall |
3,000 lbs per pair |
+ FREE Shipping!
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| RR-WC |
(4) Race Ramps Rubber Wheel Chocks
Prevents vehicle from moving while stationary to avoid injury and property damage
Rubber Wheels Chocks Product Details |
Enlarge Image |
+ FREE Shipping!
|
| 4in-Rat-Flat-Hook-special |
4" Flat Hook Ratchet Strap
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 14 lbs
4" Flat Hook Ratchet Strap Product Details |
Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook-special |
4" J-Hook Ratchet Strap
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 16lbs
4" J-Hook Ratchet Strap Product Details |
Enlarge Image |
+ 10 s&h
|
| 4in-Truck-Winch-Chain |
4" Winch Strap w/ Chain Anchor
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 6lbs
4" Winch Strap with Chain Anchor Product Details |
Enlarge Image |
+ 5 s&h
|
| 4in-Truck-Winch-Flat |
4" Winch Strap w/ Flat Hook
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 6lbs
4" Flat Hook Tie-Down Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Chain |
3" Trailer Winch Strap w/ Chain Anchor
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 6lbs
3" Trailer Cargo Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Flat |
3" Trailer Winch Strap w/ Flat Hook
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 5lbs
3" Flat Hook Cargo Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 3in-Rat-Chain |
3" Ratcheting Tie-Down Strap
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 18lbs
3" Ratcheting Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 18RAT-J-2 |
Ratchet Straps w/ J-Hooks (pair)
2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with J-Hook Product Details |
Enlarge Image |
+ 9 s&h
|
| 18RAT-S-2 |
Ratchet Straps w/ S-Hooks (pair)
2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with S-Hook Product Details |
Enlarge Image |
+ 9 s&h
|
| 2-soft-loop-2 |
(2) Soft Loop Straps
Protect equipment when using hook end tie-downs - 2" wide x 20" long - 4500 lb break strength (1500 lb working load)
20" Long Soft Loop Product Details |
Enlarge Image |
+ 5 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder
9200 lb Capacity / 33,000 lb Break Strength
Opens Approx. 8" and works with chains from 3/8" to 1/2"
Heavy Duty Load Binder Product Details |
Enlarge Image |
+ 12 s&h
|
| Strap - 2" Axle |
Ratchet Combination Tie Down with Built in Axle Strap
2" wide x 8' long - 11,000lb Break Strength - 4000lb Working Load
Axle Tie Down Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| AUTO-2-STJ |
2" Combo Auto Tie Down Hook
2" Swivel Combination T-J Hook - 11,700 lb Rating
Auto Combo Hook Product Details |
Enlarge Image |
+ 5 s&h
|
|
|
Powersports
Wheelchair / Mobility
Pet
Vehicle Cargo
Recreation / Storage
Commercial / Utility
Pickup Truck