
These step deck trailer ramps are becoming a standard tool in the trucking industry. Our high quality step deck ramps have been designed by an Engineer with 30 years experience in the loading industry and are the lightest, strongest ramps on the market. Beware of cheap imitation stepdeck trailer ramp systems being sold using a knife cut (smooth taper) at the bottom of the ramp to save manufacturing costs - they are bending the toe at bottom of the ramps causing them to break. Our well designed heavy duty ramps have a reinforced stubbed toe at the bottom of the ramp so they may be used as a modular system or used as 8 foot ramps on the rear of the trailer without bending the bottom of the ramp. This drop deck trailer ramp system breaks down into sections weighing 74 lbs allowing it to be set up easily in minutes. The stepdeck ramp ends pin to an adjustable center support stand and skid seat ramp bracket on the trailer or loading dock. The adjustable support stands can change the loading angle onto step deck trailers, loading docks, and flat bed trailers by creating an offset angle or arch. The required skid seat brackets are available in steel or aluminum and must be welded or bolted to the trailer or loading dock for safety and versatility to change the width of the ramps to accommodate different vehicles or equipment. This step deck system will pay for itself by freeing up additional space on your drop deck trailer allowing room to haul an extra vehicle or more freight cargo. These step deck trailer ramps are Not recommended for indoor forklifts.
Add Lockable Ramp Hangers and Stand Hangers to store your entire ramp system. We offer a single ramp hanger for the low clearance trailers and double ramp hanger brackets for trailers with a little more clearance under the deck. The stand hangers are available in two models. The rear stand hangers are designed for storing the stand behind the rear tandem of a 53' trailer. The front stand hanger will mount the stand in front of the rear axle. All the stand hangers and ramp hangers are lockable to eliminate theft.
Rated at 20,000 and 23,500 lbs per axle. How Do I Determine Axle Capacity?
The best way to determine your vehicle's axle weight is to drive the heaviest axle of the vehicle on a scale. Normally the front end of the truck is the heaviest axle weight because of the engine. Not recommended for trucks with mounted cranes, forklifts, steel track vehicles.
Warning! NEVER EXCEED THE MAXIMUM AXLE CAPACITY OF THIS RAMP SYSTEM! 4000 lb Capacity systems, 10,000 lb Capacity, and Load Leveler/ Ramp Combo kits also available.
Step Deck Ramps Image Gallery


Ramp Storage Brackets

Support Stand Hangers

Video Demonstration
- Constructed of lightweight aluminum for superior durability and strength
- New reinforced double pin stubbed toe at the bottom of the ramp to eliminate ramp curling up at different load heights
- Versatile and fully adjustable ramp system sets up in minutes
- Extra wide plate style serrated cross bars offer maximum traction in the rain, mud, or snow
- Load vehicles from the front, back, or top step with one ramp system
- Lightest and strongest ramps in the industry
- Ramps are rated per axle (see maximum vehicle capacities below)
- Ramp Hanger Storage Brackets available
- Support Stand Brackets available
- 1 year manufacturer's warranty
- Proudly made in the USA

WARNING! "02" Pin End Ramps must be pinned into skid seat brackets before using ramps

Step Deck Trailer Ramp Kit
| Item # |
Kit Includes: |
Capacity (per axle) |
Width (each) |
Height |
Overall Length |
Total Weight |
Image |
Price |
| 20-16-192-02-02M |
(4) 8' x 16" aluminum ramps with double pin-on ends (2) Heavy Duty Adjustable lower ramp support stands (18"-24") *Ramps must be used with attaching brackets (sold separately) see below |
20,000 lbs (rated per axle) |
16" |
6" tall |
16' |
380 lbs |
Enlarge Image |
+ freight In Stock Item Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| 23-18-192-02-02M |
(4) 8' x 18" aluminum ramps with double pin-on ends (2) Heavy Duty Adjustable lower ramp support stands (18"-24") *Ramps must be used with attaching brackets (sold separately) see below |
23,500 lbs rated per axle) |
18" |
5" tall |
16' |
452 lbs |
Enlarge Image |
+ freight In Stock Item Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| 23-20-192-02-02M |
(4) 8' x 20" aluminum ramps with double pin-on ends (2) Heavy Duty Adjustable lower ramp support stands (18"-24") *Ramps must be used with attaching brackets (sold separately) see below |
23,500 lbs (rated per axle) |
20" |
5" tall |
16' |
460 lbs |
Enlarge Image |
+ freight In Stock Item Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
Step Deck Trailer Ramp Components
| Item # |
Capacity (rated per axle) |
Length |
Width |
Height |
Weight (each) |
Image |
Price |
20-16-096-02-02-LL (Double pin ends) |
20,000 lbs per axle |
96" |
16" wide |
6" thick |
74 lbs |
Enlarge Image |
pair + freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
23-18-096-02-02-LL (Double pin ends)
 |
23,500 lbs per axle |
96" |
18" wide |
5" thick |
92 lbs |
Enlarge Image |
pair + freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
23-20-096-02-02-LL (Double pin ends)
 |
23,500 lbs per axle |
96" |
20" wide |
5" thick |
94 lbs |
Enlarge Image |
pair + freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
10-16-18-24-STD-H (2 hangable adjustable support stands)
 |
23,500 lbs per axle |
- |
20" wide |
18" to 24" |
42 lbs |
Enlarge Image |
pair + freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
Step Deck Trailer Upper Step Ramps
| Item # |
Description |
Weight (each) |
Image |
Price |
| 10-16-096-02-02 |
Pair of 96" long x 16" wide x 4.25" tall ramps rated at 10,000 lbs per axle. (Double pin ends, ideal for the loading on the upper step & hanging in ramp hangers) |
59 lbs |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
Ramp Storage Brackets
| Item # |
Brackets sold in pairs: |
Image |
Price |
| Ramp-Hanger-Double-5 |
Pair of Lockable Aluminum Ramp Hanger Brackets for hanging two 5" thick ramps (use for 18" or 20" wide ramps) (order 2 pairs to hang 4 ramps) |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Ramp-Hanger-Double-6 |
Pair of Lockable Aluminum Ramp Hanger Brackets for hanging two 6" thick ramps (use for 16" wide ramps) (order 2 pairs to hang 4 ramps) |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Ramp-Hanger-Single |
Pair of Lockable Aluminum Single Ramp Hanger Brackets for hanging one ramp. (26" drop decks) (order 4 pairs to hang 4 ramps) |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
Support Stand Hangers
| Item # |
Brackets sold in pairs: |
Image |
Price |
| STAND-HANGERS-FRONT |
Pair of Lockable Front Aluminum Stand Hanger Brackets for hanging two stands in front of the rear axle. (order 1 pair per ramp system) |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
Skid Seat Ramp Attaching Brackets

Skid seat brackets must be used with all pin end ramp systems to secure them to your loading dock, step deck trailer, or flat bed. Ramp tubes sit down in skid seat channel and pinned eliminating the risk of ramp slipping off trailer or dock. Consider brackets wider than your ramps so you can slide the ramps in or out to accommodate different vehicles. WARNING! Aluminum brackets must be bolted or welded to your trailer or loading dock before using ramps. Steel brackets must be welded at the top and bottoms of brackets.
| Item # |
Description |
Length |
Width |
Image |
Price |
| Skid seat-A97 (each) |
(1) 97 " aluminum ramp attaching bracket (recommended for rear of step deck and upper deck) |
97" long ea |
4" |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid seat-A48 (each) |
(1) 48" aluminum ramp attaching bracket (recommend a pair for rear of step deck and upper deck) |
48" long ea |
4" |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid seat-A36 (each) |
(1) 36" aluminum ramp attaching brackets |
36" long ea |
4" |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid seat-A24 (each) |
(1) 24" aluminum ramp attaching brackets (recommend a pair for front of step deck) |
24" long ea |
4" |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid Seat-S36 (each) |
(1) 36" steel ramp attaching brackets |
36" long ea |
2" |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid Seat-S24 (each) |
(1) 24" steel ramp attaching brackets |
24" long ea |
2" |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| Ladder-16-48 |
48" Aluminum Trailer Ladder for Step Decks & Drop Deck Trailers with 28" to 42" Decks |
 Enlarge Image |
+ 15 s&h
|
| Ladder-16-72 |
72" Aluminum Trailer Ladder for Upper Step Decks & Flat Bed Trailers with 36" to 66" Decks |
 Enlarge Image |
+ 15 s&h
|
| 4in-Rat-Flat-Hook |
4" Flat Hook Ratchet Strap with a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 14 lbs |
 Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook |
4" J-Hook Ratchet Strap with a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs |
 Enlarge Image |
+ 10 s&h
|
| 18RAT-J-2 |
2 inch wide x 18 foot long ratchet straps w/ J-Hooks (pair) |
 Enlarge Image |
+ 6 s&h
|
| 18RAT-S-2 |
2 inch wide x 18 foot long ratchet straps w/ S-Hooks (pair) |
 Enlarge Image |
+ 6 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder - 9200 lb Capacity / 33,000 lb Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2" |
 Enlarge Image |
+ 12 s&h
|
| Strap - 2" Axle |
2" x8' Ratchet Combination Tie Down with Built in Axle Strap - 11,000lb Break Strength - 4000lb Working Load |
 Enlarge Image |
+ 5 s&h
|
| AUTO-2-STJ |
4" Combo Auto Tie Down Hook - 16,200 lb Rating |
 Enlarge Image |
+ 5 s&h
|


Call for a quote on custom ramp applications. We can manufacture any size or weight capacity custom ramp you require!
  |