Tru-Cut™ Deluxe Steel 2-Piece Truck Service Ramps - 6,000 lb per axle Capacity
Heavy Duty Vehicle Service Ramps
In Stock
Limited Lifetime Warranty USA

Quickly and easily raise the front of a vehicle for service with the Tru-Cut Deluxe Steel Two-Piece Truck Service Ramps. Simply drive the vehicle up — the raised sides and squared wheel stop prevent you from rolling off while rubber pads prevent the ramps from slipping. When not in use, the ramp section may be removed from the platform for storage or transport.

  • 7" lift height
  • Heavy-duty solid steel construction
  • 1-1/2" raised sides and squared wheel stop keep tires on track
  • Rubber padded feet prevent slipping during use
  • Ramps are detachable
  • Supports up to 10,000 lbs per pair

The Tru-Cut Deluxe Steel Two-Piece Truck Service Ramps are ideal for raising your car or truck up 7" for service and maintenance. Constructed of heavy-duty steel to support up to 10,000 lbs per pair, the service ramps feature 1-1/2 " raised sides, squared wheel stops to prevent you from rolling off, and rubber inserts on each corner foot ensure the ramps do not slip during use. Each ramp weighs 20 lbs.

One-piece steel construction with solid steel supports and removable ramp ( pair )
40lbs ( 20 lbs per ramp )
10,000 lbs G.V.W. per pair (6000 lbs per axle)

Product Features

  • 30-2310 has a 10,000 Gross Vehicle Weight G.V.W. capacity per pair
  • Heavy Gauge solid steel construction
  • 1-1/2" raised sides and squared wheel stop
  • Support braces for extra strength
  • Rubber inserts on bottom allow for a non-slip approach
  • The widest steel service ramp available
  • Lifts the front or rear of a car 7"
  • Quicker than jacking up a vehicle, just drive on
  • Car ramp overall dimensions - 38 " long x 10 3/4" wide x 8 1/2" high
  • Each ramp weighs only 20 lbs
  • Limited lifetime warranty

Warning and Usage Guidelines

  • Before using the ramps ensure other persons are clear of the vehicle and the ramps
  • Ensure that the ramps are free from damage or corrosion before use.
  • Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
  • Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
  • Carefully drive the vehicle onto the automotive ramps until it is in the correct position
  • Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
  • Before starting work, walk around the vehicle ensuring it is securely positioned
  • Always use jack stand if a person will be going under the vehicle
  • On completion of the work, check the parking brake is still firmly on and remove the chocks
  • It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
  • Exercise caution when using these car ramps with a trailer or three wheeled vehicle


Ramps vs. Jack Stands: Which are Best for Auto Service?

Review Summary