6,500 lbs. Per Axle Capacity - Auto Steel Vehicle Oil Change Ramps

The Tru-Cut Ultra-Ramps Steel Truck Service Ramps are ideal for easily raising most trucks, cars, or SUVs for service and maintenance. These ramps feature a stamped steel structure with heavy-duty raised grip holes for extra traction, and are available with solid steel supports to accommodate vehicles weighing up to 6,500 lbs. Both versions feature the same dimensions and loading surface, and include an angled wheel stop to prevent the vehicle from rolling off during loading. Each truck service ramp has a dimension of 35 " long x 13 " wide x 9 ¼" high total ramp size which includes an 11" by 9" platform at the top.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.