Black Widow Car Lift and Service Ramps -13,000 lb. GVW Capacity per Pair

The Black Widow Car Lift and Service Ramps are made from heavy-duty black polyurethane, and are perfect for raising cars, trucks, SUVs, and vans for service and maintenance. The two-piece design allows users to remove the ramp section once their vehicle is raised for better underbody access.

Lightweight at 20 lbs. each, they have an open channel grid design so that snow, water, dirt and debris pass through easily. With a 13,000 lbs. per pair capacity, these ramps can handle nearly any vehicle from coupe to truck. Measuring 52" L x 15" W x 8" H, these ramps also feature rubber feet to prevent slipping while in use.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.