Titan Ramps Low-Profile Aluminum Car Ramps - 3,000 lb. GVW Capacity per Pair

The Titan Ramps Aluminum Low Profile Car Ramps are ideal for vehicles with low ground clearance, allowing you to drive up the ramps for servicing or display the vehicle on your lot. These aluminum ramps are lightweight and durable, and support up to 1,500 lb. capacity per ramp (total capacity of 3,000 lb.).

The ramps provide 9.5" of lift height, allowing plenty of room for servicing the undercarriage as well as routine maintenance such as changing the oil and replacing filters. The 11.5-degree incline is ideal for low-riding vehicles with body kits and lowered suspension. Service ramps are considered safer and more efficient than car stands and jacks for vehicle maintenance.

Each ramp measures 64.5" L x 16" W overall. The incline measures 49.25" L. The interior width measures 15.25", which is large enough to accommodate most vehicle tires.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.