Black Widow Plastic Low Profile Car Ramps - 10,000 lb. GVW Capacity per Pair

Easily access the underside of your low-profile vehicle with the Black Widow Plastic Low Profile Car Service Ramps. With a 17-degree loading angle, they provide up to 3" of lift height for low-profile cars and support up to 10,000 lbs. per pair. They feature hollow honeycomb channels to prevent moisture from building up and tire stops to ensure that your vehicle is properly positioned on the ramp.

Each ramp weighs 5 lbs. each, making this pair easy to transport, position or store in a home garage or in an auto service center. Anti-slip rubber pads on the underside of each ramp increases traction on smooth surfaces.

Before using the ramps, ensure that the area around the vehicle and ramps is clear. Check each ramp for damage before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use a jack stand if a person is going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from contacting the ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.