Black Widow Plastic Service Ramps - 10,000 lb. GVW Capacity per Pair

This set of plastic service ramps is made from high impact plastic, and is perfect for raising cars, trucks, SUVs, and vans 6-1/4" for service and maintenance. These lightweight service ramps feature a grid design, which allows snow, water and dirt to easily flow through no matter the weather conditions. Featuring a specialty internal support system that runs through the center of the ramp to support and distribute weight, these ramps are incredibly sturdy. With a 10,000 lbs. per pair capacity, these ramps can handle nearly any vehicle. Measuring 35-1/2" L x 12" W x 8-1/2" H, these ramps also feature rubber feet to prevent slipping while in use.

Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.