These heavy duty steel drive on automotive car ramps offer a quick and easy way to lifts your car or pick up truck for service or repair. These heavy duty car ramps have a 5000 lb. capacity for larger vehicles. These car service ramps will lift your car or truck a full 9 inches high with ease by just driving on. The dimensions of the car service ramps are 34" long X 9 3/4" wide X 9" high. The ramps feature tire stop on the end so you know when your tires are safely on the ramps. The ramps weigh only 20 lbs a piece! Use these ramps as a lifting jack replacement. Discount Ramps.Com recommends exercising caution when ever using the automotive car ramps for user safety. If your looking for lighter duty version of the automotive drive on car ramp, a low profile car ramp, or other car ramp, then check out our complete line of car ramps.
Click the pictures of the automotive car ramps below to enlarge
- 5000 lb. weight capacity
- Heavy gauge stamped steel platform
- Sold in pairs
- Support braces for extra strength
- Fitted with tire stops
- Lifts the front or rear of a car 8.25"
- Quicker than jacking up a vehicle, just drive on
- Car ramp overall dimensions - 34" long x 9.75" wide x 9" high
- Heavy duty car ramps weigh 20 lbs. per ramp
Automotive Car & Truck Ramp Pricing & Specifications Table
| Model # |
Description |
Weight Capacity |
Lift Height |
Price Per Pair |
| 6010 |
Heavy-duty Drive-On Automotive Car Ramps (Pair) |
5000 lbs. |
8 1/4" |
+23 s&h
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
