Buy the most versatile full-size folding motorcycle ramp on the market today!
 We took our best selling Big Boy and went to the next level making it the most versatile loading ramp system ever offered in the industry! This 2-piece aircraft grade aluminum loading motorcycle ramp system is available in 4 different lengths x 38" wide and now consists of two 19" wide folding ramps (view features and dimensions). It is designed to load all types of motorcycles including cruisers, sport bikes, Harleys, the Boss Hoss, touring motorcycles, and other types of motorcycles into full-size pick-up trucks including stock or lifted 4x4 trucks, 2 wheel drive trucks, trailers, box trucks, loading docks, or toy haulers. The Big Boy II includes two quick connecting support brackets that hold the two sections together for safety while loading motorcycles and also eliminates ramp flex for safe loading. These connecting brackets also allow the ramp to be split in two sections by pulling a spring clip pin on the support brackets making it easy to handle and more compact for storing it next to the bike in the pick-up truck bed or inside the cab of the truck on some vehicles. The Big Boy also features a heavy duty hinge system on each ramp allowing the complete ramp system to be folded in half for storage if desired. Folds down to half its length and sits only 5.625" high. The 12° offset in the hinge acts the same as an arched ramp and provides additional ground clearance to eliminate bottoming when loading into 4x4 pick-up trucks or loading lowered bikes.
The unique 2-piece Big Boy II ramp allows one person to drive the motorcycle up the ramp or you can walk up one 19" wide runner while pushing the bike up the other ramp. The innovative 3-3/4" ramp end features a solid flat plate/hook combo adding even more versatility for loading on different surfaces. The tapered foot on the bottom of the ramp has an extruded traction surface and creates a smooth loading approach surface at almost any angle. This extruded foot has a built in radius on the bottom that will pivot on different vehicle load heights and can be safely used on 10" or higher trailers or trucks. The Big Boy II ramp comes with two heavy cam buckle safety straps that connect the ramp to the vehicle to keep it from kicking out while loading. The serrated cross rung loading surface are spaced 3-5/8" apart so your foot will not slide through while walking on the ramp and also creates a superior traction in the outdoor elements.
The Big Boy II is manufactured in the USA and has a five year manufacturer's warranty against any defects.
Big Boy II Ramp Image Gallery
Shown with optional Alumi-Loc Ramp Attaching System!
FINALLY ONE LOADING RAMP TO LOAD ALL THE TOYS!!
Our Big Boy II is the most versatile and complete loading ramp available. Not only can it be used to load your motorcycle, it can be used to load the rest of the toys in your garage. The two sections can also be used with the connecting brackets to load motorcycles or without the connecting brackets to load all your four wheeled vehicles with pneumatic tires including 3 and 4 wheel ATVs (pictured below), utility terrain vehicles (UTVs) including the Yamaha Rhino, John Deere Gator, Kabota RTV, Kawasaki Mule, Polaris Ranger (pictured below), zero turn lawn mowers, go carts, lawn and garden tractors, stump grinders, generators, pressure washers, golf carts (including electric), and other larger wheeled vehicles up to 3000 lbs (1500 lb capacity per ramp).
- New 2-piece universal design for loading all types of pneumatic vehicles
- 2 connecting support brackets hold ramp sections together and eliminate ramp flex
- Lightweight all aluminum design
- Allows loading with one person loading
- Designed to walk or ride bike up and down
- Works loading a motorcycle, ATV, utility vehicle (UTV), and lawn & garden equipment
- 3-3/4" plate/hook attaching lip supports the ramp on vehicle
- 12° offset in ramps allow more ground clearance to eliminate bottoming
- 2 cam buckle safety straps keep ramp securely connected to vehicle
- Serrated cross rung design offers superb traction (3.5" rung spacing)
- 5 year manufacturer's warranty
- Manufactured by certified AWS welders
- Made in the USA PAT NO. D595920
- Featured in V-Twin, Rider, Hotbike Baggers, American Iron Motorcycle Bagger, and Ultimate Motorcycling magazines
- Instructions
|
 |
Not sure what ramp length you need? Find out with the ramp calculator!
Big Boy II Motorcycle Ramp Product Specifications & Price
| Item # |
Unfolded Length |
Folded Length |
Folded Height |
Weight Capacity |
Weight |
Width |
Price |
MF2-9638 (The Big Boy II)
96" folding arched motorcycle ramp for all makes and models of motorcycles, ATVs, utility vehicles (UTVs), and lawn & garden equipment (NEW 2 PIECE DESIGN) |
8' (96") |
48.5" |
5 5/8" |
3,000 lbs
(1,500 lbs each ramp) |
36 lbs each
(72 lbs total weight) |
38" (total)
(2) 19" wide sections |
+ 50 s&h
|
MF2-10838 (The Big Boy II)
108" folding arched motorcycle ramp for all makes and models of motorcycles, ATVs, utility vehicles (UTVs), and lawn & garden equipment (NEW 2 PIECE DESIGN) |
9' (108") |
54.5" |
5 5/8" |
3,000 lbs
(1,500 lbs each ramp) |
40 lbs each
(80 lbs total weight) |
38" (total)
(2) 19" wide sections |
+ 55 s&h
|
MF2-12038 (The Big Boy II)
120" folding arched motorcycle ramp for all makes and models of motorcycles, ATVs, utility vehicles (UTVs), and lawn & garden equipment (NEW 2 PIECE DESIGN) |
10' (120") |
60.5" |
5 5/8" |
2,500 lbs
(1,250 lbs each ramp) |
43 lbs each
(86 lbs total weight) |
38" (total)
(2) 19" wide sections |
+ 75 s&h
|
MF2-14438 (The Big Boy II)
144" folding arched motorcycle ramp for all makes and models of motorcycles, ATVs, utility vehicles (UTVs), and lawn & garden equipment (NEW 2 PIECE DESIGN) |
12' (144") |
72.5" |
5 5/8" |
2,000 lbs
(1,000 lbs each ramp) |
54 lbs each
(108 lbs total weight) |
38" (total)
(2) 19" wide sections |
+ 100 s&h
|
View Our Other Popular Motorcycle Products
|
|
Powersports
Wheelchair / Mobility
Pet
Vehicle Cargo
Recreation / Storage
Commercial / Utility
Pickup Truck