Lifts a motorcycle or sport bike via the triple tree pin system. An interchangeable pin locks in the top with a spring clip, the stand rolls and pivots into place, and allows one person to lift the motorcycle front end up with a single handle. The center supports have a 180° pivot point for optimal configuration during use.
The Black Widow Motorcycle Race Stand is an innovative way of lifting a motorcycle front end for wheel changes, fork maintenance, and off season storage. The top portion of the motorcycle race stand pivots on a 180° center point for positioning the stand into place and to fit a variety of motorcycle frames. An interchangeable pin locking system on the end of a 12-3/4" arm top-end, allows different motorcycle pins to be held into place with a spring clip. The motorcycle race stand then lifts from the motorcycle pin in the triple tree as the main, and only point of weight contact. Weight is then distributed evenly throughout the uniquely designed motorcycle race stand frame and dual 7-1/4"L gusset, providing optimal stability during maintenance and storage. Each motorcycle race stand includes 5 triple tree pins, sized: 0.507" (13mm), 0.588" (15mm), 0.645" (16.5mm), 0.668 "(17mm) and 0.704" (18mm).
The 12-1/2" wide tire area is complimented with four high traffic grade, 3" rubberized castor wheels allowing the entire black powder coat Motorcycle Race Stand to be maneuvered and tilted while lifting a motorcycle into place with an 8-1/2" handle. In the middle of the motorcycle race stand frame are two pivoting supports that provide optimal versatility for each motorcycle lift. The Black Widow Motorcycle Race stand is assembled in 3 easy steps, andweighs 14 lbs. While it is designed for single person operation, a second person is strongly recommended for the safest handling of your motorcycle. Comes with a one year manufacturer's warranty.
Please Note: These universal motorcycle stands are designed to work with a variety of motorcycles. However, the motorcycle stands will not work with every make and model, nor does DiscountRamps.com necessarily maintain a complete database of that information. To ensure correct size and compatibility, please measure the diameter of the hole in the frame, then compare to the stand pin sizes listed.
5 Stars 4 years, still works good
Anthony from NC wrote (September 20, 2015):
I bought this 4 years ago and it still works just fine on my 2007 Yamaha R6. I used it to rebuild the front forks and i use it to keep pressure off the front forks and tires when the bike is not used. Great build and great price.