
Truck trailer ramps are designed and engineered to hold up to 5,000 lbs (per axle) 8,500 lb pick-ups! The ramps are constructed of an aircraft grade aluminum which makes them extremely durable yet light enough for easy maneuverability without hurting your back! They feature a knife cut foot (except part numbers ending in -S) designed for a smooth transition onto the ramp while loading cars or pick-up trucks. Please measure the height of your trailer or truck to be sure you are within the load height range designed for the ramp (see specification table below). These trailer ramps have a serrated cross bar surface for additional strength and traction when tires are wet or muddy (unlike traditional round bar rungs). All trailer ramps are constructed of aluminum and will never rust! The ramps are available in multiple lengths to accommodate almost any trailer, truck or box van. Included with your purchase of a new truck trailer ramp is a one year manufacturer's warranty!
There are multiple attaching end options to choose from. The hook end will hook over existing round rails up to 1-5/16" in diameter or rub rails. The flat plate end rests directly on the trailer or truck bed. The flat plate ramp end has a rubber grip pad underneath the lip and includes two safety straps to prevent the ramp from kicking out during loading and unloading operations. The last option for ramp end is the pin on end. This style requires skid seat ramp attaching brackets and is the safest option because the ramp is securely pinned to the truck, trailer or loading dock. If wider brackets than the ramp are purchased, the ramps can be slid back and forth in the bracket while still being attached to the trailer to accommodate different width vehicles being loaded.
Truck Trailer Ramps Image Gallery

Rated at 5,000 lbs per axle. How Do I Determine Axle Capacity?
The best way to determine your vehicles axle weight is to drive the heaviest axle on a scale. Normally the front of your car, SUV, or pick-up truck is the heaviest axle weight because of the engine. Not recommended for forklifts, steel track vehicles or skid loaders weighing more than 5,000 lbs.
- Four heavy duty ramp attaching lip choices
- Extra wide plate style serrated cross bars offer maximum traction in the rain, mud or snow. Stronger than the traditional "rung" design.
- Constructed of lightweight aircraft grade aluminum for superior durability and strength
- Ramps are rated per axle (see maximum vehicle capacities below).
- Safe for loading wheeled equipment, vehicles and some commercial equipment.
- Low profile design allows ramps to slide into storage brackets under truck or trailer
- Strongest, lightest ramps on the market - guaranteed!
- 30+ years experience
- 1 year manufacturer's warranty
- Steel Skid Seat Instructions

- Aluminum Skid Seat Instructions

- Aluminum Skid Seat Instructions (bolted)

- Manufactured by certified AWS welders
- Proudly made in the USA

Not sure what ramp length you need for your vehicle? Find out with the ramp calculator!

5,000 lb Per Axle Truck Trailer Ramp Product Specifications & Price
| Item # |
Capacity (rated per axle) |
Length |
Width |
Thick |
Load Height |
Attaching end |
Foot Type |
Weight (each) |
Price (pair) |
05-15-060-04-S (LOW PROFILE) |
5,000 lbs (8500 lb max vehicle) |
5' (60") |
15" |
2" (LOW PROFILE) |
up to 24" |
Hook |
Stub |
26 lbs |
+ 35 s&h
|
05-15-072-04-HD (LOW PROFILE) |
5,000 lbs (8500 lb max vehicle) |
6' (72") |
15" |
2" (LOW PROFILE) |
12"-15" |
Hook |
Knife |
35 lbs |
+ 50 s&h
|
| 05-15-094-04 |
5,000 lbs (8500 lb max vehicle) |
7'10" (94") |
15" |
3.25" |
16"-24" |
Hook |
Knife |
36 lbs |
+ 50 s&h
|
| 05-15-094-06 |
5,000 lbs (8500 lb max vehicle) |
7'10" (94") |
15" |
3.25" |
16"-24" |
Flat Plate |
Knife |
37 lbs |
+ 50 s&h
(Includes safety straps) |
05-15-060-00-LAYOVER
 Enlarge Image |
5,000 lbs (8500 lb max vehicle) |
5' (60") |
15" |
2" |
n/a |
n/a |
Knife |
22 lbs |
+ 35 s&h
Note: Only works with 2 beam ramps
Including Item#'s:
02-12-072-046-S
03-12-060-046-S
03-12-060-04-S
04-15-072-04
05-15-060-04-S
05-15-072-04-HD
05-15-094-04
05-15-094-06
05-15-094-04-LP |
05-15-094-04-LP (LOW PROFILE) |
5,000 lbs (8500 lb max vehicle) |
7'10"(94") |
15" |
2.75" (LOW PROFILE) |
16"- 24" |
Hook |
Knife |
39 lbs |
+ 60 s&h
|
05-18-096-04-S (LOW PROFILE) |
5,000 lbs (8500 lb max vehicle) |
8' (96") |
18" |
2.25" (LOW PROFILE) |
up to 24" |
Hook |
Stub |
52 lbs |
+100 s&h
|
| 05-16-120-04 |
5,000 lbs (8500 lb max vehicle) |
10' (120") |
16" |
4.75" |
20"-36" |
Hook |
Knife |
47 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| 05-16-120-06 |
5,000 lbs (8500 lb max vehicle) |
10' (120") |
16" |
4.75" |
20"-36" |
Flat Plate |
Knife |
47 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431 (Includes safety straps) |
| 05-16-120-01 |
5,000 lbs (8500 lb max vehicle) |
10' (120") |
16" |
4.75" |
20"-36" |
Pin On |
Knife |
47 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| 05-20-120-01 |
5,000 lbs (8500 lb max vehicle) |
10' (120") |
20" |
3.25" |
24"-30" |
Pin On |
Knife |
72 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| 05-16-144-04 |
5,000 lbs (8500 lb max vehicle) |
12' (144") |
16" |
4.25" |
24"-36" |
Hook |
Knife |
65 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| 05-16-144-06 |
5,000 lbs (8500 lb max vehicle) |
12' (144") |
16" |
4.25" |
24"-36" |
Flat Plate |
Knife |
65 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431 (Includes safety straps) |
| 05-16-144-02 |
5,000 lbs (8500 lb max vehicle) |
12' (144") |
16" |
4.25" |
24"-36" |
Pin On |
Knife |
65 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| 05-18-192-04 |
5,000 lbs (8500 lb max vehicle) |
16' (192") |
18" |
5.25" |
36"-42" |
Hook |
Knife |
99 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| 05-18-192-06 |
5,000 lbs (8500 lb max vehicle) |
16' (192") |
18" |
5.25" |
36"-42" |
Flat Plate |
Knife |
99 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431 (Includes safety straps) |
| 05-18-192-02 |
5,000 lbs (8500 lb max vehicle) |
16' (192") |
18" |
5.25" |
36"-42" |
Pin On |
Knife |
99 lbs |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
Skid Seat Ramp Attaching Brackets
Skid seat brackets must be used with all pin end ramp systems to secure them to your loading dock, trailer or box van. Ramp tube sit down in skid seat channel and pinned eliminating the risk of ramp slipping off trailer or dock. Consider brackets wider than your ramps so you can slide the ramps in or out to accommodate different vehicles. WARNING! Aluminum brackets must be bolted or welded to your trailer or loading dock before using ramps. Steel brackets must be welded at the top and bottoms of brackets.
Skid Seat Product Specifications & Price
| Item # |
Description |
Length |
Width (inches) |
Image |
Price |
| Skid seat-A97 (each) |
(1) 97 " aluminum ramp attaching bracket (recommended for rear of step deck and upper deck) |
97" long ea |
4" wide |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid seat-A48 (each) |
(1) 48" aluminum ramp attaching bracket (recommend a pair for rear of step deck and upper deck) |
48" long ea |
4" wide |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid seat-A36 (each) |
(1) 36" aluminum ramp attaching brackets |
36" long ea |
4" wide |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid seat-A24 (each) |
(1) 24" aluminum ramp attaching brackets (recommend a pair for front of step deck) |
24" long ea |
4" wide |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid Seat-S36 (each) |
(1) 36" steel ramp attaching brackets |
36" long ea |
2" wide |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
| Skid Seat-S24 (each) |
(1) 24" steel ramp attaching brackets |
24" long ea |
2" wide |
Enlarge Image |
+ freight Shipping Quotes & Ordering Call Toll Free 1-888-651-3431
|
Recommended Accessories
| Item # |
Description |
Image |
Price |
| ICC-BLOCK |
Bumper support blocks eliminate trailer sag while loading and unloading heavy cargo. Prevents damage to ramp feet from trailer drop. View ICC Support Block Product Details |
 Enlarge Image |
per inch + FREE Shipping!
|
| 4in-Rat-Flat-Hook-special |
4" Flat Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 14 lbs 4" Flat Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook-special |
4" J-Hook Ratchet Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 16lbs 4" J-Hook Ratchet Strap Product Details |
 Enlarge Image |
+ 10 s&h
|
| 4in-Truck-Winch-Chain |
4" Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Winch Strap with Chain Anchor Product Details |
 Enlarge Image |
+ 5 s&h
|
| 4in-Truck-Winch-Flat |
4" Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 4" Flat Hook Tie-Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Chain |
3" Trailer Winch Strap w/ Chain Anchor With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 6lbs 3" Trailer Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Flat |
3" Trailer Winch Strap w/ Flat Hook With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 5lbs 3" Flat Hook Cargo Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 3in-Rat-Chain |
3" Ratcheting Tie-Down Strap With a 15,000 lb Break Strength - 5,000 lb Working Load Limit Weighs: 18lbs 3" Ratcheting Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| 18RAT-J-2 |
Ratchet Straps w/ J-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with J-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 18RAT-S-2 |
Ratchet Straps w/ S-Hooks (pair) 2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with S-Hook Product Details |
 Enlarge Image |
+ 9 s&h
|
| 2-soft-loop-2 |
(2) Soft Loop Straps Protect equipment when using hook end tie-downs - 2" wide x 20" long - 4500 lb break strength (1500 lb working load) 20" Long Soft Loop Product Details |
 Enlarge Image |
+ 5 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder 9200 lb Capacity / 33,000 lb Break Strength Opens Approx. 8" and works with chains from 3/8" to 1/2" Heavy Duty Load Binder Product Details |
 Enlarge Image |
+ 12 s&h
|
| AUTO-2-STJ |
2" Combo Auto Tie Down Hook 2" Swivel Combination T-J Hook - 11,700 lb Rating Auto Combo Hook Product Details |
 Enlarge Image |
+ 5 s&h
|
| Strap - 2" Axle |
Ratchet Combination Tie Down with Built in Axle Strap 2" wide x 8' long - 11,000lb Break Strength - 4000lb Working Load Axle Tie Down Strap Product Details |
 Enlarge Image |
+ 5 s&h
|
| WTD-RAT-SWIVEL |
Car Tie-Down Strap 1-1/4"W x 11'-1"L strap (11'9"L Hook to Ratchet) - Fits all auto and light truck wheels Car Tie-Down Strap Product Details |
 Enlarge Image |
Order Here |
| CTS-RAT-SNAP |
Wheel Tie-Down Net 2" W x 5-1/2' L wheel strap (Fits 13" - 16" wheels) Wheel Tie-Down Net Product Details |
 Enlarge Image |
Order Here |
| CTS-RAT-CAM |
Wheel Net 2" W x 5-1/2' L wheel net (Fits 16" D or larger wheels) Wheel Net Product Details |
 Enlarge Image |
Order Here |


Call for a quote on custom ramp applications. We can manufacture any size or weight capacity custom ramp you require!
 |
|