 
These are some heavy duty ramps!! The 30-2310 is a great service ramp for most vehicles under 10,000 lbs It is constructed of heavy gauge steel with 4 supports for added stability. These heavy duty truck ramps have a 10,000 lb G.V.W. capacity per pair. The 1 1/2 " raised sides and the squared wheel stop keep your tires on the platform at all times. The driving platform is 10 3/4" wide by 14 1/2" long only 9" by 12" is usable so it will accommodate most tires. The vehicle service ramp has a total length of 26" long and has the same width as the platform. The bottom of the service platform is 17" long with a rubber insert on each corner to ensure a non-slip approach. The service ramps for your vehicle have a black finish and have the ability to raise the front or rear of your vehicle 8". The total weight of the ramps is 40 lbs, or 20 lbs per ramp. These heavy duty ramps can also be used as car service ramps but may not work due to low ground clearance; low profile cars may not fit properly. View the pictures below for more illustrated details!
Service Ramps Image Gallery
- 30-2310 has a 10,000 G.V.W. capacity per pair
- Heavy Gauge solid steel construction
- 1 1/2" raised sides and squared wheel stop
- Support braces for extra strength
- Rubber inserts on bottom allow for a non-slip approach
- The widest steel service ramp available
- Lifts the front or rear of a car 7"
- Quicker than jacking up a vehicle, just drive on
- Car ramp overall dimensions - 38 " long x 10 3/4" wide x 8 1/2" high
- Each ramp weighs only 20 lbs
|
- Before using the ramps ensure other persons are clear of the vehicle and the ramps
- Ensure that the ramps are free from damage or corrosion before use.
- Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle
- Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread
- Carefully drive the vehicle onto the automotive ramps until it is in the correct position
- Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground
- Before starting work, walk around the vehicle ensuring it is securely positioned
- Always use jack stand if a person will be going under the vehicle
- On completion of the work, check the parking brake is still firmly on and remove the chocks
- It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp
- Exercise caution when using these car ramps with a trailer or three wheeled vehicle
|
Heavy Duty Vehicle Service Ramps - Product Specifications & Price
| Item # |
Structure |
Overall Dimensions |
Lift Height |
Capacity |
Weight |
Price |
| 30-2310 |
One-piece steel construction with solid steel supports and removable ramp ( pair ) |
38 " long x 10 3/4" wide x 8 1/2" high |
7" |
10,000 lbs G.V.W. per pair *
(6000 lbs per axle) |
40lbs
( 20 lbs per ramp ) |
+ 30 s&h
|
* G.V.W. rating can be found on the sticker inside the vehicle door
Recommended Accessories
| Item # |
Description |
Image |
Price |
| RR-RMAT-6 |
Racer Mat - Padded shop mat to lie or kneel on while working on vehicles.
Dimensions: 64" L x 24" W x 2" H
Garage Floor Mat Product Details |
Enlarge Image |
+ Free Shipping!
|
| 4in-Rat-Flat-Hook-special |
4" Flat Hook Ratchet Strap
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 14 lbs
4" Flat Hook Ratchet Strap Product Details |
Enlarge Image |
+ 10 s&h
|
| 4in-Rat-J-Hook-special |
4" J-Hook Ratchet Strap
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 16lbs
4" J-Hook Ratchet Strap Product Details |
Enlarge Image |
+ 10 s&h
|
| 4in-Truck-Winch-Chain |
4" Winch Strap w/ Chain Anchor
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 6lbs
4" Winch Strap with Chain Anchor Product Details |
Enlarge Image |
+ 5 s&h
|
| 4in-Truck-Winch-Flat |
4" Winch Strap w/ Flat Hook
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 6lbs
4" Flat Hook Tie-Down Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Chain |
3" Trailer Winch Strap w/ Chain Anchor
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 6lbs
3" Trailer Cargo Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 3in-Truck-Winch-Flat |
3" Trailer Winch Strap w/ Flat Hook
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 5lbs
3" Flat Hook Cargo Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 3in-Rat-Chain |
3" Ratcheting Tie-Down Strap
With a 15,000 lb Break Strength - 5,000 lb Working Load Limit
Weighs: 18lbs
3" Ratcheting Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| 18RAT-J-2 |
Ratchet Straps w/ J-Hooks (pair)
2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with J-Hook Product Details |
Enlarge Image |
+ 9 s&h
|
| 18RAT-S-2 |
Ratchet Straps w/ S-Hooks (pair)
2 inch wide x 18 foot long - 3000 lb break strength (1000 lb working load)
18' Long Ratchet Straps with S-Hook Product Details |
Enlarge Image |
+ 9 s&h
|
| 2-soft-loop-2 |
(2) Soft Loop Straps
Protect equipment when using hook end tie-downs - 2" wide x 20" long - 4500 lb break strength (1500 lb working load)
20" Long Soft Loop Product Details |
Enlarge Image |
+ 5 s&h
|
| LOAD-BINDER |
Heavy Duty Load Binder
9200 lb Capacity / 33,000 lb Break Strength
Opens Approx. 8" and works with chains from 3/8" to 1/2"
Heavy Duty Load Binder Product Details |
Enlarge Image |
+ 12 s&h
|
| Strap - 2" Axle |
Ratchet Combination Tie Down with Built in Axle Strap
2" wide x 8' long - 11,000lb Break Strength - 4000lb Working Load
Axle Tie Down Strap Product Details |
Enlarge Image |
+ 5 s&h
|
| AUTO-2-STJ |
2" Combo Auto Tie Down Hook
2" Swivel Combination T-J Hook - 11,700 lb Rating
Auto Combo Hook Product Details |
Enlarge Image |
+ 5 s&h
|
|
|
Powersports
Wheelchair / Mobility
Pet
Vehicle Cargo
Recreation / Storage
Commercial / Utility
Pickup Truck