Big Boy EZ Rizer Aluminum Folding 3-Piece Trike and Motorcycle Ramp

Starting at
Make a Selection
Select Length:
  • Manufactured from high-strength, lightweight aluminum
  • Total weight capacities up to 4,500 lbs., center weight capacity 1,500 lbs.
  • Available in four sizes up to 12' long with 57" total width
  • Exclusive EZ Traction punch plate surface for superior non-slip grip
  • Folds in half and breaks down into three interlocking pieces for easy transport and storage
  • Super wide platform accommodates motorcycle trikes, Can-Am Spyders, street glides, or heavy touring bikes
  • Combination plate and hook lip supports ramp on tailgate and rubber padding won't scratch and adds extra grip
Item # Length Width Height Weight Maximum Capacity Center Ramp
Availability Price  
MF3-9657-EZ 8' 57" 2-1/2" 138 lbs. 4,500 lbs. 1,500 lbs.
View Details
MF3-10857-EZ 9' 57" 2-1/2" 153 lbs. 4,500 lbs. 1,500 lbs.
View Details
MF3-12057-EZ 10' 57" 2-1/2" 159 lbs. 4,500 lbs. 1,500 lbs.
View Details
MF3-14457-EZ 12' 57" 2-1/2" 183 lbs. 3,000 lbs. 1,000 lbs.
View Details

Planning to do some long-distance touring on your trike, or heading out to a rally? The new Trike Motorcycle Ramp, featuring our exclusive skid-free EZ Traction loading surface, makes driving your trike motorcycle right onto a trailer or pickup truck painless and worry-free! At an industry-leading 57" wide, the EZ Rizer aluminum trike loading ramps system has plenty of room for your Can-Am Spyder or H-D Tri Glide but breaks down into three separate, folding 19" ramps for easy portability. Heavy duty hinges are offset 12 degree to give EZ Rizer an arched shape for additional clearance that's needed with low-riding or longer bikes.

You won't find more aggressive traction or a wider motorcycle loading ramp anywhere than the EZ Rizer Trike Motorcycle Ramp! Our exclusive EZ Traction design is field-tested for reliable, no-skid performance, even coming through in wet or slick conditions. Three 19" motorcycle ramps lock together in a snap with supportive C brackets and quick-clip pins to create a huge but stable 57" wide loading surface, and they easily fit a Spyder Roadster, Razor, Voyager or other three-wheeled motorcycle. This versatile motorcycle loading system also has the bonus of using the ramps individually as single or dual runners for other motorcycles, ATVs, UTVs or lawn tractors, too.

EZ Rizer is stabilized at the base with an angled foot and up on top with a deep, rubber-backed plate and hook overlap that rests on the tailgate. You'll also get some peace of mind from the three included cam buckle tie down straps that secure to a rear bracket to prevent the ramp from kicking out. The tapered foot and attaching lip make drive-up loading of your motorcycle trike smooth and stress-free, so there's no need to "gun it" and risk your equipment. EZ Rizer is made of high-grade aluminum that's strong enough to carry even the heaviest bikes but lightweight for setup without straining your back. Heavy, industrial-grade hinges are offset 12 degrees to create a slight arch for more clearance that low-profile vehicles sometimes need. And when it's time to hit the road after your trike motorcycle is loaded, the trike ramps fold down to just 5" high and stow off to the side in your pickup bed for easy transport. It's recommended that the stored ramps are secured to the vehicle or trailer with additional tie downs (not included).

Note: Use of the EZ Rizer extra wide motorcycle ramp system may require additional bridging planks or blocks at the base for vehicles with an exceptionally long wheel base or low ground clearance.

1,500 lbs.
All products are guaranteed to be free of defects at time of receipt. Warranties are non-transferable. If you have a question regarding the warranty on a specific item, contact our product experts at 1-888-651-3431, Monday - Friday from 8:00am to 5:30pm Central Standard Time.

Fill in the form below to see the minimum ramp length you need.

Need help measuring? Click Here

Please enter wheel base.
Please enter wheel base.
Please enter wheel base.
Minimum ramp length = ft. (1:12 Slope)