RV Motorcycle Carrier Lift System

The CruiserLift RV motorcycle carrier offers you the ultimate in freedom by easily transporting your motorcycle with your RV on all your adventures. This is the best engineered RV motorcycle carrier on the market today. The motorcycle tray has a ground clearance of 40" to allow the tow vehicle to motor coach distance to be as short as possible. This distance also keeps the motorcycle out of the way of most road debris while traveling with an RV or motor home as well as keeping the tray from bottoming out on the road while maneuvering steep road or driveway transitions.  The Cruiserlift Carrier System can be fully assembled and disassembled by one individual in approximately 10 minutes. This RV motorcycle carrier is the only system available with a road dampening shock system. The RV motorcycle carrier has a weight carrying capacity of 1000 pounds. You have the ability to flat tow a 6000 pound vehicle when using the Cruiser lift  motorcycle RV lift system. The Cruiserlift carrier is the perfect compliment to your RV when carrying your recreational vehicle toys. The Cruiserlift System may appear structurally overbuilt to some. It was designed and engineered for long lasting appearance and durability. The integrity of the system is backed up by our Product Liability Insurance policy. If a product does not have Product Liability Insurance...RUN!
(Class A Diesel Pushers Motorhomes Only)

CruiserLift RV Motorcycle Carrier Image Gallery

CruiserLift RV Motorcycle Carrier Product Features:

1) ONE PERSON ASSEMBLY & DISMANTLING:

• One individual can assemble and disassemble the CruiserLift carrier system to and from the motor home or RV.
• No tools required in either operation
• No assembly piece weighs more than 50 lbs

2) STANDARD TOW BAR (ONLY 18 POUNDS):

• The tow bar is not structurally associated with the lifting mechanism, so there are no unwanted stresses applied to the motorcycle carrier while towing a vehicle.
• Allows for the shortest distance between the motor coach and towed vehicle.
• Maximum tongue weight is 75 lbs

3) KICK STAND TRAY:

• Standard feature with the CruiserLift and allows the user the freedom of loading the motorcycle onto the lift, setting the kick stand plate and leaving the motorcycle in place without having someone else hold the bike while the tie downs are set.

4) REMOTE WATERPROOF ELECTRIC WINCH SWITCH BOX:

• Supplied 15 feet of winch to switch cable supplied

5) HEAVY DUTY (OVERSIZED) WINCH CABLE:

• 3/16-7 x 19 solid core galvanized wire rope

6) 2000 POUND CAPACITY WINCH:

• Increased to 6000 lbs with double pulley

7) ADJUSTABLE REMOVABLE TIE DOWN POINTS:

•  Rear inside & outside tie down pints are removable for system access

8) INTEGRATED LIGHTING:

• All lights are permanently attached to the powered motorcycle carrier system
• No need to disconnect the wiring harness from the motor home to operate the motorcycle lift system.
• Large 8" lights for optimal visibility
• Includes towed vehicle 6-way receiver

9) SHORTEST TOW VEHICLE LENGTH TO COACH IN THE INDUSTRY:
10) HIGH STRENGTH (GRADE 8 OR BETTER) BOLTS & PINS:
11) 1000 POUND MOTORCYCLE CAPACITY:

• Design accommodates all standard motorcycles on the market

12) ONE PIECE MOTORCYCLE TRAY (92"L x 8"W usable):
13) BAKED ON POWDER COAT FINISH:

• Rust resistant non-skid coating with truck bed spray on liner.

14) FLAT TOW 5000 POUNDS:
15) PRODUCT LIABILITY INSURANCE:
16) MEETS “DOT” STANDARDS FOR G-FORCE LOAD:
17) ENGINEERING LOAD & STRESS ANALYSIS:
18) OPTIONAL RUBBERIZED COATING ON MOTORCYCLE TRAY:

• Truck bed spray on textured liner reduces the chances of scratching paint & developing rust.

19) GAS CHARGED HEAVY DUTY SHOCK:

• Reduces bouncing effect and vibration of the system while traveling on rough roads.

20) MOTORCYCLE HEIGHT IN ELEVATED POSITION = 40”:

• 40" height from ground to tray in highest position
• Reduces the amount of road spray and debris coming in contact with the motorcycle
• Reduces the tow-vehicle to coach distance
• Other systems have a height of only 27"

Recommended Accessories

Item #	Description	Image	Price
BW-STRAP-C	1 inch by 7 foot long motorcycle tie down kit for pick up trucks and trailers - 4 piece kit (4 cam straps) (Click here for more strap info)	Enlarge Image	+ 8 s&h
Basic	1 inch strap by 6 foot long tie down kit for pick up trucks and trailers- 8 piece kit (2 cam straps- 2 ratchet straps- 4 soft loops) (Click here for more strap info)	Enlarge Image	+ 8 s&h
Basic-R	1 inch by 6 foot long ratchet strap tie down kit for pick up trucks and trailers- 8 piece kit (4 ratchet straps- 4 soft loops) (Click here for more strap info)	Enlarge Image	+ 8 s&h
ADVANCED	Includes: 8 piece strap package plus 2 sleeve protectors, 4 stud rings with mounting plates and hardware (Click here for more strap info)	Enlarge Image	+ 10 s&h
HDMC-Strap	2 inch strap by 6 foot long tie down kit for pick up trucks and trailers - 8 piece kit (2 cam straps- 2 ratchet straps- 4 soft loops) (Click here for more strap info)	Enlarge Image	+ 8 s&h
HDMCR-Strap	2 inch by 6 foot long ratchet strap tie down kit for pick up trucks and trailers- 8 piece kit (4 ratchet straps- 4 soft loops) (Click here for more strap info)	Enlarge Image	+ 8 s&h

View Our Other Popular Motorcycle Products